|
Aluminium alloy, can be hardened |
go back |
|
Aluminium alloy, can be hardened
| Material No. |
EN AW-6060 |
| DIN material No. |
3.3206 |
| Abbreviation |
AlMgSi |
| Description |
Aluminium alloy, can be hardened |
Composition
Alloy constituents [%] |
Mg: 0.35 – 0.6
Si: 0.3 – 0.6 |
| Density [g/cm³] |
2.70 |
Yield point
Rp0.2 [N/mm²] min. – max. |
80 – 150 |
Tensile strength
Rm [N/mm²] min. – max. |
150 – 215 |
Elongation after fracture
A [%] min. – max. |
8 – 16 |
Brinell hardness
HB reference value |
45 |
Corrosion resistance
in normal atmosphere |
Very good |
Corrosion resistance
in coastal atmosphere |
Very good |
| Machinability |
Moderate |
| Weldability |
Good |
| Anodising capability |
Very good (corrosion protection)
Very good (decorative) |
High-gloss polishing,
mechanical |
Very good |
| Main uses |
Medium-strength components: windows, doors, vehicle bodies, metal profiles, household items, decorations, screws |
|
| This information is for reference only; we do not assume any liability for its accuracy. The properties of metal materials are highly dependent on their thermal and/or mechanical treatment. |
Back to overview |
|
|
|
| Availability Here you can check item's availability. |
|
