|
Cast iron with lamellar graphite
|
go back |
|
Cast iron with lamellar graphite
Cast type |
Cast iron with lamellar graphite |
Material No. |
EN-JL-1030 |
US standard (AISI) |
No. 20 B |
DIN EN 10027-2 |
5.1300 |
Abbreviation |
EN-GJL-200 |
Old designation |
GG20 DIN 1561 |
Composition [%] |
C: 2.95 – 3.45 Si: 2.10 – 2.90 Mn: 0.55 – 0.75 P: 0.10 – 0.20 S: 0.04 – 0.07 |
Density [g/cm³] |
7.15 |
R0.2 N/mm² Yield strength |
- |
0.1% Elongation limit Rp0.1 N/mm² |
130-195 |
Tensile strength Rm [N/mm²] |
200 – 300 |
Brinell hardness HB30 Sample <30 mm |
180-220 |
Elongation after fracture A% |
0.8 – 0.3 |
Elastic modulus E kN/mm² |
88 – 113 |
Compressive strength Sdb N/mm² |
720 |
Workability |
Very good |
Weldability |
Limited, can be welded with special electrodes |
Compressive strength |
Good |
Emergency-running properties |
Good |
Thermal conductivity |
Good |
Vibration-absorbing properties |
Good |
Castability |
Very good |
Other properties |
|
Structure |
Ferritic/pearlitic |
Main uses |
For complicated workpieces with a lot of contours, very versatile Machine frames, gearboxes, bearing housing, pumps, general machine construction Recommended wall thicknesses: up to 20 mm, fittings, pumps, parts for general machine construction, palm grips, star grips |
|
This information is for reference only; we do not assume any liability for its accuracy. The properties of steel materials are highly dependent on their thermal and/or mechanical treatment. |
Back to overview |
|
|
|
Availability Here you can check item's availability. |
|