- Operating parts | standard elements
- Clamping levers, tension levers, cam levers
- Grips, knobs
- Pull handles, tubular handles, recessed handles
- Handwheels, crank handles, position indicators
- Quarter-turn locks, edge protection profiles
- Hinges
- Swivel feet, levelling feet
- Tube connectors, profile connectors
- K0472
Tube clamps, cross, plastic
- K0472
Tube clamps, cross, aluminium
- K0472
Tube clamps, cross, aluminium
- K0472
Tube clamps cross
stainless steel
- K0473
Tube clamps, cross, plastic
- K0473
Tube clamps, cross, aluminium
- K0474
Tube clamps, cross, plastic
- K0474
Tube clamps, cross, aluminium
- K0475
Tube clamps T-angle
plastic
- K0475
Tube clamps T-angle
aluminium
- K0475
Tube clamps T-angle
stainless steel
- K0476
Tube clamps T-angle
plastic
- K0476
Tube clamps T-angle
aluminium
- K0476
Tube clamps, right-angle, aluminium
- K0477
Tube clamps, base, plastic
- K0477
Tube clamps, base, aluminium
- K0477
Tube clamps base
stainless steel
- K0478
Tube clamps, base, plastic
- K0478
Tube clamps, base, aluminium
- K0479
Tube clamps, flange, plastic
- K0479
Tube clamps, flange, aluminium
- K0479
Tube clamps, flange, aluminium
- K0479
Tube clamps flange
stainless steel
- K0480
Tube clamps, flange, plastic
- K0480
Tube clamps, flange, aluminium
- K0481
Tube clamps, straight, plastic
- K0483
Tube clamps, straight, plastic
- K0484
Tube clamps swivel half, sunken teeth, plastic
- K0485
Tube clamps swivel half, raised teeth, plastic
- K0486
Tube clamps swivel half, sunken teeth, plastic
- K0487
Tube clamps swivel base, sunken teeth, plastic
- K0488
Tube clamps, swivel, plastic
- K0488
Tube clamps, swivel, aluminium
- K0489
Tube clamps, swivel, plastic
- K0489
Tube clamps, swivel, aluminium
- K0490
Tube clamps, swivel base, plastic
- K0490
Tube clamps, swivel base, aluminium
- K0491
Reducer sleeves
square
- K0492
Reducer sleeves
round
- K0493
Round and square tubes
- K0494
Tube end plugs
- K1510
Monitor brackets
- K0495
Linear actuators
- K0495
Linear actuators, stainless steel
- K0496
Linear actuator connector clamps, cross
- K0496
Linear actuator connector clamps, stainless steel
cross
- K0497
Linear actuator connector clamps, cross
- K0498
Linear actuator connector clamps, flange
- K0498
Linear actuator connector clamps, stainless steel
flange
- K0499
Linear actuator connector clamps, base
- K0499
Linear actuator connector clamps, stainless steel
base
- K0615
Square tube connectors
straight
- K0616
Square tube connectors
two-way
- K0617
Square tube connectors
three-way, flat
- K0618
Square tube connectors
four-way, flat
- K0619
Square tube connectors
three-way
- K0620
Square tube connectors
four-way
- K0621
Square tube connectors
five-way
- K0622
Square tube connectors
six-way
- K0623
Square tube connectors
three-way with tapped hole
- K0624
Square tube connectors
four-way with tapped hole
- K0625
Square tube connectors
two-way swivel
- K0626
Square tube connectors
three-way swivel
- K0627
Square tubes
- K0628
Square tubes
single-finned
- K1042
Straps
- K1043
Angles
- K1045
Angle sets
Type I
- K1046
Angle sets
Type B
- K1047
Angle elements T1
Type I
- K1048
Angle elements T2
Type I
- K1049
Clamping angles
Type I
- K1050
Joint angles
Type I
- K1051
Joints
Type B and Type I
- K1053
End caps
Type B and Type I
- K1054
Cover and adapter profiles
Type B and Type I
- K1055
Cover profile
Type I
- K1056
Slide rail
Type I
- K1057
Foot plates
Type B and Type I
- K1278
Cable tie block
- K1279
Cable clips
- K1280
Cable clips with T-slot key
- K1281
Sensor holders
- K1282
Earthing terminal
type I
- K1283
Potential equaliser
type I
- Telescopic slides
- Latches, snap locks, slam latches
- Toggle clamps, power clamps
- Clamping elements
- Spring plungers, indexing plungers, ball lock pins
- Support elements, locating elements, stop elements
- Machine and fixture components
- Joints
- Magnets
- Buffer elements
- Level indicators, screw plugs
- Scales, scale rings, level vials
- Material handling
- Tools
- Hygiene Shield
- Clamping technology
- Special solutions
- Classic products
- Order number, changeover
|
|
|
Tube connectors, profile connectors |
go back |
|
Tube connectors are components for the assembly of profiles and systems. They are ideal for protective equipment, enclosures, housing and racks of all kinds in mechanical engineering.
New tube connection elements and profile connectors |
|
| The cable tie block from KIPP is ideal for securing hoses and cables. With the aid of a cap or pan head screw combined with a slot key, the cable tie block can be installed on both panels and aluminium profiles. Cable ties are used to hold the cables and hoses in place. |
|
|
| KIPP cable clips can be used for cables and hoses with a diameter of up to 12 mm. These are installed in the same way as the cable tie block (cap or pan head screw + slot key). The cables are held in place by the stretched O-ring. |
| The cable clip with T-slot key is installed by inserting the T-slot key into a T-slot and twisting through 90°. |
|
|
| With the new KIPP sensor holder, sensors and limit switches can be easily and securely fastened to aluminium profiles or panels. The associated fastening piece provides a positive rotation lock and can be adjusted in 15° increments. With no fastening piece, the sensor holder can be infinitely angularly adjusted. |
|
|
| The new KIPP earthing terminal type I is suitable for connecting aluminium profiles and earthing aluminium profile constructions. Conductive contact is established through defined destruction of the oxide layer in the slot base flanks. |
|
|
Potential equaliser type I
| The potential equaliser type I is used to establish an electrostatic discharge (ESD) line to ensure protection for personnel and equipment. It is swivelled into the slot and screwed against the profiles at a 45° angle. A conductive connection develops as soon as the oxide layer is breached. |
|
|
|
| Availability Here you can check item's availability. |
|
