- Operating parts | standard elements
- Clamping levers, tension levers, cam levers
- Grips, knobs
- Pull handles, tubular handles, recessed handles
- Handwheels, crank handles, position indicators
- Quarter-turn locks, edge protection profiles
- Hinges
- Swivel feet, levelling feet
- Tube connectors, profile connectors
- Telescopic slides
- Latches, snap locks, slam latches
- Toggle clamps, power clamps
- Clamping elements
- Spring plungers, indexing plungers, ball lock pins
- Spring plungers
- Indexing plunger
- K2047
Indexing plungers steel or stainless steel
with plastic eyelet grip
- K1502
Indexing plungers, stainless steel with plastic mushroom grip and remote actuation
- K2042
Bowden cable distributor
for indexing plungers with remote actuation
- K2023
Wire cables
with end piece
- K2024
Traction sleeves
with inner tube
- K2025
End sleeves
- K2026
Setscrews
- K2027
Screw nipples
locked with grub screw
- K1584
Indexing plungers, steel or stainless steel with plastic cam lever
- K1744
Indexing plungers steel or stainless steel with plastic mushroom grip and status sensor, hardwired
- K1495
Indexing plungers, steel or stainless steel with status sensor and plastic mushroom grip
- K1845
Magnetic base
for WLAN antenna
- K1846
Extension cable
for WLAN antenna
- K0338
Indexing plungers
- K1096
Indexing plungers, steel or stainless steel with plastic mushroom grip and thread lock
- K1149
Indexing plungers, steel with plastic mushroom grip and locked mark
- K1213
Indexing plungers, steel or stainless steel with plastic mushroom grip and lock
- K0630
Indexing plungers, steel or stainless steel, with plastic mushroom grip extended indexing pin and load slot
- K0631
Indexing plungers, steel or stainless steel, short version with plastic mushroom grip
- K1097
Indexing plungers, steel or stainless steel, short version with plastic mushroom grip and thread lock
- K1698
Indexing plungers, stainless steel for Hygienic USIT® seal and shim washers, with stainless steel mushroom grip
- K0632
Indexing plungers, stainless steel with stainless steel mushroom grip
- K0735
Indexing plungers, steel or stainless steel for thin-walled parts, with plastic mushroom grip
- K0339
Indexing plungers, steel or stainless steel with plastic mushroom grip
- K0747
Indexing plungers ECO, steel or stainless steel, with plastic mushroom grip
- K0635
Indexing plungers, steel or stainless steel without collar, with stainless steel pull ring
- K0346
Indexing plungers, steel or stainless steel, smooth version without collar, with plastic mushroom grip
- K0347
Indexing plungers, steel or stainless steel, smooth version without collar, with plastic mushroom grip
- K0636
Indexing plungers, steel or stainless steel, smooth version without collar, with stainless steel pull ring
- K1839
Positioning bushes, steel or stainless steel
with status sensor
- K1840
Positioning bushes, steel or stainless steel
for status sensor
- K1290
Positioning bushes
for indexing plungers
- K0665
Spacer rings
- K0736
Bushes tapered
- K0736
Premium - Indexing plungers, steel or stainless steel with plastic mushroom grip and cylindrical indexing pin
- K0736
Bushes cylindrical
- K0736
Premium - Indexing plungers, steel or stainless steel with plastic mushroom grip and tapered indexing pin
- K1300
Indexing plungers, steel or stainless steel with plastic mushroom grip, rotation lock and lead-in chamfer
- K1124
Indexing plungers, steel or stainless steel with plastic T-grip
- K0359
Precision indexing plungers, steel with plastic spherical knob and tapered indexing pin
- K0360
Bushes tapered
- K0361
Precision indexing plungers, steel with plastic spherical knob and cylindrical indexing pin
- K0362
Bushes cylindrical
- K1833
Indexing plungers, steel with plastic twist knob and tapered indexing pin
- K1834
Indexing plungers, steel with plastic twist knob and tapered indexing pin
- K1835
Bushing steel, tapered
- K1098
Indexing plungers ECO, steel or stainless steel with plastic mushroom grip and thread lock
- K0748
Indexing plungers ECO, steel or stainless steel, short version with plastic mushroom grip
- K0340
Indexing plungers, steel with draw hook
- K0341
Indexing plungers, steel or stainless steel with threaded pin
- K0342
Indexing plungers, steel or stainless steel with stainless steel pull ring
- K0343
Indexing plungers, steel or stainless steel without collar, with plastic mushroom grip
- K0633
Indexing plungers, steel or stainless steel, without collar, with plastic mushroom grip, extended indexing pin and locknut
- K0634
Indexing plungers, stainless steel, without collar, with stainless steel mushroom grip
- K0344
Indexing plungers, steel or stainless steel without collar, with plastic mushroom grip
- K1116
Indexing plungers, steel or stainless steel, pneumatic
- K0344
Screw-in washer
- K0345
Indexing plungers, steel or stainless steel without collar, with threaded pin
- K1582
Indexing and clamping grips, steel with plastic star grip
- K1583
Indexing and clamping grips, steel with plastic star grip and optical lock indicator
- K0245
Indexing plungers with five lobe grip
- Cam action indexing plunger
- Ball lock pins
- Locking pins
- Retaining cables, ball chains
- Support elements, locating elements, stop elements
- Machine and fixture components
- Joints
- Magnets
- Buffer elements
- Level indicators, screw plugs
- Scales, scale rings, level vials
- Material handling
- Tools, workshop supplies
- Hygiene Shield
- Clamping technology
- Special solutions
- Classic products
- Order number, changeover
|
Indexing plungers from KIPP
| Among the large number of different operating parts that HEINRICH KIPP WERK carries in its range are indexing plungers. KIPP offers more than 1300 different high-quality versions of these. |
|
|
What are indexing plungers and how do they work?
| Indexing plungers facilitate fast and easy adjustment of moving components. Thanks to the wide range of different models, they can be used in every conceivable area. When indexing plunger grip is pulled, the pin retracts and the object can be adjusted. When the user releases the grip, the pin extends again and the movable part is locked. Indexing plungers thus prevent a change in the indexed position through lateral forces. Athough there are many different types of indexing plunger, they all have much the same operating principle. |
|
|
Different types of indexing plunger |
|
Standard indexing plunger
| These types are indexing plungers that are operated in the classic way: The pin is retracted by pulling on the grip of the plunger. The pin extends again when the grip is released. Various versions of standard indexing plungers are available. One of these is the lock-out type of indexing plunger. The special feature here is the locking option when the pin is retracted. When the user pulls and twists the grip, the pin remains retracted. This means a user has both hands free with open or closed covers and hatches, where previously one hand was needed to hold the indexing plunger open. |
|
|
Indexing plunger with lock
| These indexing plungers differ fundamentally from the classic types. To lock it, the button in the head is pressed. This causes the pin to extend and engage. Secure locking is indicated by a protruding red button on the side. When the user presses this button, the pin unlocks. It now retracts and thus releases the lock. |
|
|
Indexing plungers with cam lever
| By versions with a cam lever, the lever replaces the knob of the indexing plunger. Thanks to cam levers, these models can be opened easily and quickly with just one finger. When the lever has been moved beyond the dead centre, the indexing pin remains retracted by itself without having to be fixated again. Compared to lock-out type indexing plungers, there is an enormous time saving when using several plungers on one object. |
|
|
Indexing plunger with remote actuation
| Indexing plunger with remote actuation are designed for applications where the user has to operate the indexing plunger remotely for safety reasons or due to lack of space. A Bowden cable, which transmits the movement is located between the actual plunger body and the indexing pin. Indexing plungers with Bowden cable are available in different lengths so that they can be best adapted to the required distance. |
|
|
Indexing plungers, pneumatic
| Pneumatic indexing plungers differ from other models in the way they are actuated. They are operated by compressed air, not by hand. This enables integration into automated production processes. The pin is extends when air pressure is applied to the system. When the air supply is interrupted, the pin is retracted by a spring. |
|
|
Indexing plunger with integrated status sensor
| Industry 4.0 is omnipresent nowadays and it is impossible to imagine modern production without it. Thanks to intelligent indexing plungers with integrated status sensor, positioning applications can now also be integrated into the production process. The built-in sensor sends the current actuated status to a Gateway, incorporating it into the production control system. This minimises errors, as a process only starts e.g. when all indexing plungers have the correctly status. |
|
|
Premium or classic - it depends on the application!
In the KIPP range you will find classic and Premium indexing plungers. The difference is not in the quality, but in the precision of the individual products. To find out which type of indexing plunger is right for you, you need to consider the subsequent application. Is it for adjusting the height of a grip on a unit? Or does every millimetre count, as in the adjustment of components in machine construction?
For simpler applications, the high-quality classic versions are quite sufficient. Selected materials improve the durability of the products and guarantee years of use. However, where precise repeatability as well as fine adjustment is required, KIPP's Premium indexing plungers are ideally suited for these applications. They are manufactured to the highest accuracy and, in combination with matching bushes, enable precise positioning operations. |
|
|
Materials – Steel, stainless steel or plastic?
It is also important to consider the future application when choosing the material. Each material has its advantages and disadvantages.
Almost all indexing plungers have a plastic grip or knob. It should be noted that these may only be exposed to certain temperature ranges. However, if the indexing plunger is to be used in areas with higher or lower temperatures, models with a stainless steel grip must be used.
Sleeve and pin are available in steel and stainless steel, making them suitable for different applications. Steel models are particularly stable and can be used for demanding applications. If outdoor use is intended however, stainless steel plungers should be used. They have very good corrosion resistance and a long service life even in damp or wet areas.
|
|
|
KIPP indexing plungers are very versatile
Thanks to different materials and designs, indexing plungers from KIPP can be used in almost all areas and for all applications. Some examples are:
- Machine construction: Positioning on guide rails
- Fixture construction: Assembly fixtures
- Foodstuff industry: Filling lines, packaging lines
- Vehicle technology: Indexing on runners, latching
- Rehab sector: Wheelchairs
- Agriculture: Adjusting the depth of ploughshares
|
|
|
Suitable indexing plungers in the KIPP online shop
| You can find the appropriate indexing plunger for your application in the KIPP online shop. Select your quality product from a wide range and order it conveniently online. Thanks to our extensive warehouse, we have many items in stock and can keep delivery times as short as possible. If you still can't find a suitable indexing plunger, then contact us. On request, we can also work with you to develop individual special solutions that are precisely tailored to your application. |
|
|
|
| Availability Here you can check item's availability. |
|
