Indexing plungers, steel or stainless steel, with threaded pin,...

go back

Products
- Operating parts | standard elements
  - Spring plungers, indexing plungers, ball lock pins
    - Indexing plunger
      - Indexing plungers, steel or stainless steel with threaded pin
        Indexing plungers, steel or stainless steel, with threaded pin, no locknut

Item description/product images

DescriptionMaterial:

Steel version
Indexing pin hardened:
grade 5.8.

Stainless steel version
Indexing pin hardened:
Threaded sleeve 1.4305.
Indexing pin 1.4034.

Indexing pin not hardened:
Threaded sleeve 1.4305.
Indexing pin 1.4305.

Version:Steel version:
Indexing pin hardened, ground, black oxidised.

Stainless steel version:
Indexing pin hardened, ground and bright.
Indexing pin not hardened, ground and bright.Note:Indexing plungers are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the pin has been disengaged. Special grips can be fitted on the projecting threaded pin. This pin is also suitable for automatic actuation e.g. programme controlled pneumatic cylinder or by remote control using bowden cables.On request:Special versions.Accessory:Spacer rings K0665.
Fastening sets for thin-walled parts K2146.Special features:

DownloadHere is all the information as a PDF datasheet:

Are you looking for CAD data? These can be found directly in the product table.

Datasheet K0341_E Indexing plungers, steel or stainless steel with threaded pin

203 kB

Drawings

Item selection/filter

Order No.	Form	Main material	Surface finish body	D	D1	D2	L	L1	L2	L3	L4	Travel S	SW1	Fx30°	Spring force initial pressure F1 approx. N	Spring force final pressure F2 approx. N	Price
K0341.1903	E	0.0035	Clamping Joint	3	M6x0,75	M2	24	12	5	3,5	10	3,5	8	0,8	4,5	10	on request
K0341.1004	E	0.0035	Clamping Joint	4	M8x1	M3	32	15	6	7	13	4	10	1	6	12	on request
K0341.1105	E	0.0035	Clamping Joint	5	M10x1	M4	37	17	7	8	15	5	13	1,3	5	12	on request
K0341.1206	E	0.0035	Clamping Joint	6	M12x1,5	M6	42	20	8	8	17	6	14	1,8	6	14	on request
K0341.1308	E	0.0035	Clamping Joint	8	M16x1,5	M8	56	26	10	12	23	8	19	2,3	15	35	on request
K0341.1410	E	0.0067	Clamping joint TurnStop TS-280-8-8	10	M20x1,5	M8	62	28	12	12	25	10	22	2,8	15	34	on request
K0341.1412	E	0.0067	Clamping joint TurnStop TS-280-8-8	12	M20x1,5	M8	66	28	14	12	25	12	22	2,8	15	39	on request
K0341.1516	E	0.0067	Clamping joint TurnStop TS-280-8-8	16	M24x2	M10	80	32	18	14	28	16	27	3,2	20	46	on request
K0341.01903	E	25 min.	Clamping Joint	3	M6x0,75	M2	24	12	5	3,5	10	3,5	8	0,8	4,5	10	on request
K0341.01004	E	25 min.	Clamping Joint	4	M8x1	M3	32	15	6	7	13	4	10	1	6	12	on request
K0341.01105	E	25 min.	Clamping Joint	5	M10x1	M4	37	17	7	8	15	5	13	1,3	5	12	on request
K0341.01206	E	25 min.	Clamping Joint	6	M12x1,5	M6	42	20	8	8	17	6	14	1,8	6	14	on request
K0341.01308	E	280 mm / 30M10 / 20M8	Clamping joint TurnStop TS-280-8-8	8	M16x1,5	M8	56	26	10	12	23	8	19	2,3	15	35	on request
K0341.01410	E	280 mm / 30M10 / 20M8	Clamping joint TurnStop TS-280-8-8	10	M20x1,5	M8	62	28	12	12	25	10	22	2,8	15	34	on request
K0341.01412	E	280 mm / 30M10 / 20M8	Clamping joint TurnStop TS-280-8-8	12	M20x1,5	M8	66	28	14	12	25	12	22	2,8	15	39	on request
K0341.01516	E	280 mm / 30M10 / 20M8	Clamping joint TurnStop TS-280-8-8	16	M24x2	M10	80	32	18	14	28	16	27	3,2	20	46	on request
K0341.11903	E	25 min.	high performance thermoplastic	3	M6x0,75	M2	24	12	5	3,5	10	3,5	8	0,8	4,5	10	on request
K0341.11004	E	25 min.	high performance thermoplastic	4	M8x1	M3	32	15	6	7	13	4	10	1	6	12	on request
K0341.11105	E	25 min.	high performance thermoplastic	5	M10x1	M4	37	17	7	8	15	5	13	1,3	5	12	on request
K0341.11206	E	25 min.	high performance thermoplastic	6	M12x1,5	M6	42	20	8	8	17	6	14	1,8	6	14	on request
K0341.11308	E	280 mm / 30M10 / 20M8	high performance thermoplastic	8	M16x1,5	M8	56	26	10	12	23	8	19	2,3	15	35	on request
K0341.11410	E	280 mm / 30M10 / 20M8	high performance thermoplastic	10	M20x1,5	M8	62	28	12	12	25	10	22	2,8	15	34	on request
K0341.11412	E	280 mm / 30M10 / 20M8	high performance thermoplastic	12	M20x1,5	M8	66	28	14	12	25	12	22	2,8	15	39	on request
K0341.11516	E	280 mm / 30M10 / 20M8	high performance thermoplastic	16	M24x2	M10	80	32	18	14	28	16	27	3,2	20	46	on request