- Operating parts | standard elements
- Clamping levers, tension levers, cam levers
- Grips, knobs
- Pull handles, tubular handles, recessed handles
- Handwheels, crank handles, position indicators
- Quarter-turn locks, edge protection profiles
- Hinges
- Swivel feet, levelling feet
- Tube connectors, profile connectors
- Telescopic slides
- Latches
- Toggle clamps, power clamps
- Clamping elements
- Spring plungers, indexing plungers, ball lock pins
- Support elements, locating elements, stop elements
- Machine and fixture components
- Screws, nuts and washers
- K0697
Studs DIN 6379
- K0698
T-slot bolts DIN 787
- K0699
T-slot bolts DIN 787, 12.9
- K0870
Hexagon head bolts DIN 931/DIN EN ISO 4014/DIN EN 24014
- K0871
Hexagon head bolts DIN 933
- K1161
Hexagon head bolts with flange EN 1665
- K1493
Stainless steel cap nuts with collar for Hygienic USIT® seal and shim washers
- K1492
Stainless steel hexagon head screws with collar for Hygienic USIT® seal and shim washers
- K1595
Stainless steel hexagon head screws with collar and seal and shim washer for Hygienic USIT® set
- K1594
Stainless steel cap nuts with collar and seal and shim washer for Hygienic USIT® set
- K1491
Hygienic USIT® seal and shim washers
- K1329
Ball head screw in Hygienic DESIGN
- K1411
Hexagon head screws, stainless steel in Hygienic DESIGN
- K1330
Hexagon bolts with narrow shaft in Hygienic DESIGN
- K1332
Cap nut compact in Hygienic DESIGN
- K0700
Hexagon nuts thin DIN 439
- K1145
Hexagon nuts DIN 934/DIN EN ISO 4032/DIN EN 24032
- K1147
Hexagon nuts with polyamide thread lock high type, DIN 982 / stainless steel similar to DIN 982
- K1148
Hexagon nuts with polyamide thread lock thin type, DIN 985
- K1146
Hexagon nuts with thread lock DIN 980
- K0701
Hexagon nuts with collar height 1.5xD, DIN 6331 enhanced
- K0702
Hexagon nuts height 1.5xD, DIN 6330 enhanced
- K0794
Hexagon nuts with spherical seat
- K0868
Washers medium, DIN EN ISO 7089 A
- K1150
Washers with large OD DIN 9021
- K1151
Shim washers DIN 988
- K1526
Washers plastic captive
- K0730
C-washers DIN 6372 enhanced
- K0703
C-washers captive DIN 6371
- K0704
Shoulder screws with slotted flat head DIN 923
- K0705
Shoulder screws similar to DIN ISO 7379
- K0706
Shoulder screws with hexagon head similar to DIN 609
- K0707
Grub screws with flat point hexagon socket DIN 913
- K0797
Grub screw with hexagon socket and pointed end DIN 914 / DIN EN ISO 4027
- K0708
Screws with countersunk head hexagon socket DIN EN ISO 10642
- K1159
Socket head screws full thread, DIN 912 / DIN EN ISO 4762
- K0869
Socket head screws DIN 912/DIN EN ISO 4762
- K0869
Socket head screws, DIN 912 / EN ISO 4762, LONG-LOK secured
- K0869
Socket head screws DIN 912 / DIN EN ISO 4762, steel or stainless steel
- K1160
Socket head screws with low head DIN 6912
- K1418
Eye bolts DIN 444, Form B with long thread
- K0396
Eye bolts DIN 444, Form B
- K0404
Studs with screw-in stop for gluing in
- K0405
Stud sets with screw-in stop for gluing in
- K0756
T-thrust screws with fixed or sliding T-bar, DIN 6304 or DIN 6306
- K0755
Tommy bars with fixed or sliding T-bar, DIN 6305 or DIN 6307
- K0584
Clamping force intensifiers
- Threaded Inserts
- Drill bushes
- Connector for profiles and profile systems
- Shaft collars, locking rings and clamping hubs
- Machine and fixture component accessories
- Joints
- Magnets
- Buffer elements
- Level indicators, screw plugs
- Scales, scale rings, level vials
- Material handling
- Tools
- Hygiene Shield
- Clamping technology
- Special solutions
- Classic products
- Order number, changeover
|
|
K0584Clamping force intensifiers |
go back |
|
Item description/product images |
|
|
DescriptionMaterial:Bearing housing steel.Version:Black oxidised.Note:As a rule, the clamping force intensifier is used together with tightening or clamping elements. The integrated axial needle roller thrust bearing unit can achieve ca. twice the clamping force by the same lever length.Advantages:The component surface is protected by the stationary lower ring. The higher preload force causes a lower tendency for material relaxation in the thread.
Clamping levers, wing and star grips, knurled knobs or hexagonal and socket head screws etc. can be used as tightening or clamping elements.Special features: DownloadHere is all the information as a PDF datasheet:
Are you looking for CAD data? These can be found directly in the product table.
|
Other items in this category |
|
Availability Here you can check item's availability. |
|