- Operating parts | standard elements
- Clamping levers, tension levers, cam levers
- Grips, knobs
- Pull handles, tubular handles, recessed handles
- Handwheels, crank handles, position indicators
- Quarter-turn locks, edge protection profiles
- Hinges
- Swivel feet, levelling feet
- Tube connectors, profile connectors
- Telescopic slides
- Latches, snap locks, slam latches
- Toggle clamps, power clamps
- Clamping elements
- Spring plungers, indexing plungers, ball lock pins
- Spring plungers
- Indexing plunger
- K2047
Indexing plungers steel or stainless steel
with plastic eyelet grip
- K1502
Indexing plungers, stainless steel with plastic mushroom grip and remote actuation
- K2042
Bowden cable distributor
for indexing plungers with remote actuation
- K2116
Bowden cables
for indexing plungers with remote actuation
- K2023
Wire cables
with end piece
- K2024
Traction sleeves
with inner tube
- K2025
End sleeves
- K2026
Setscrews
- K2027
Screw nipples
locked with grub screw
- K1584
Indexing plungers, steel or stainless steel with plastic cam lever
- K2109
Indexing plunger, steel or stainless steel
short version with plastic cam lever
- K1744
Indexing plungers steel or stainless steel with plastic mushroom grip and status sensor, hardwired
- K1495
Indexing plungers, steel or stainless steel with status sensor and plastic mushroom grip
- K1845
Magnetic base
for WLAN antenna
- K1846
Extension cable
for WLAN antenna
- K0338
Indexing plungers, steel or stainless steel with plastic mushroom grip
- K1096
Indexing plungers, steel or stainless steel with plastic mushroom grip and thread lock
- K1149
Indexing plungers, steel with plastic mushroom grip and locked mark
- K1213
Indexing plungers, steel or stainless steel with plastic mushroom grip and lock
- K0630
Indexing plungers, steel or stainless steel with plastic mushroom grip and extended indexing pin
- K2000
Indexing plunger mini steel or stainless steel
with plastic mushroom grip
- K2001
Indexing plunger mini, die-cast zinc
with plastic mushroom grip and mounting flange
- K0631
Indexing plungers, steel or stainless steel, short version with plastic mushroom grip
- K1097
Indexing plungers, steel or stainless steel, short version with plastic mushroom grip and thread lock
- K1698
Indexing plungers, stainless steel for Hygienic USIT® seal and shim washers, with stainless steel mushroom grip
- K0632
Indexing plungers, stainless steel with stainless steel mushroom grip
- K2194
Indexing plungers, stainless steel short version with stainless steel mushroom grip
- K0735
Indexing plungers, steel or stainless steel for thin-walled parts, with plastic mushroom grip
- K0339
Indexing plungers, steel or stainless steel with plastic mushroom grip and cap
- K0747
Indexing plungers ECO, steel or stainless steel, with plastic mushroom grip
- K0635
Indexing plungers, steel or stainless steel without collar, with stainless steel pull ring
- K0346
Indexing plungers, steel or stainless steel, smooth version without collar, with plastic mushroom grip
- K0347
Indexing plungers, steel or stainless steel, smooth version without collar, with plastic mushroom grip and cap
- K0636
Indexing plungers, steel or stainless steel, smooth version without collar, with stainless steel pull ring
- K1839
Positioning bushes, steel or stainless steel
with status sensor
- K1840
Positioning bushes, steel or stainless steel
for status sensor
- K1840_A
Positioning bushes, steel or stainless steel for status sensor, Form A, full thread
- K1840_B
Positioning bushes, steel or stainless steel for status sensor, Form B, with thread and collar
- K1840_C
Positioning bushes, steel or stainless steel for status sensor, Form C, with thread and approach taper
- K1840_D
Positioning bushes, steel or stainless steel for status sensor, Form D, smooth
- K1290
Positioning bushes
for indexing plungers
- K0665
Spacer rings stainless steel
- K2146
Fastening set steel or stainless steel
for thin-walled parts
- K0736
Bush, tapered, steel or stainless steel, for Premium indexing plunger
- K0736
Premium - Indexing plungers, steel or stainless steel with plastic mushroom grip and cylindrical indexing pin
- K0736
Bush, cylindrical, steel or stainless steel, for Premium indexing plunger
- K0736
Premium - Indexing plungers, steel or stainless steel with plastic mushroom grip and tapered indexing pin
- K1300
Indexing plungers, steel or stainless steel with plastic mushroom grip, rotation lock and lead-in chamfer
- K1124
Indexing plungers, steel or stainless steel with plastic T-grip
- K0359
Precision indexing plungers, steel with plastic spherical knob and tapered indexing pin
- K0360
Bush, tapered, steel, for precision indexing plunger
- K0361
Precision indexing plungers, steel with plastic spherical knob and cylindrical indexing pin
- K0362
Bush, cylindrical, steel, for precision indexing plunger
- K1833
Indexing plungers, steel with plastic twist knob and tapered indexing pin
- K1834
Indexing plungers, steel with plastic twist knob and tapered indexing pin
- K1835
Bushing steel, tapered
- K1098
Indexing plungers ECO, steel or stainless steel with plastic mushroom grip and thread lock
- K0748
Indexing plungers ECO, steel or stainless steel, short version with plastic mushroom grip
- K0340
Indexing plungers, steel with draw hook
- K0341
Indexing plungers, steel or stainless steel with threaded pin
- K0342
Indexing plungers, steel or stainless steel with stainless steel pull ring
- K0343
Indexing plungers, steel or stainless steel, without collar, with plastic mushroom grip
- K0633
Indexing plungers, steel or stainless steel, without collar, with plastic mushroom grip and extended indexing pin
- K0634
Indexing plungers, stainless steel, without collar, with stainless steel mushroom grip
- K0344
Indexing plungers, steel or stainless steel without collar, with plastic mushroom grip and cap
- K1116
Indexing plungers, steel or stainless steel, pneumatic
- K0344
Screw-in washer
- K0345
Indexing plungers, steel or stainless steel without collar, with threaded pin
- K1582
Indexing and clamping grips, steel with plastic star grip
- K1583
Indexing and clamping grips, steel with plastic star grip and optical lock indicator
- K0245
indexing plungers, steel with plastic five lobe grip
- Cam action indexing plunger
- Ball lock pins
- Locking pins
- Retaining cables, ball chains
- Support elements, locating elements, stop elements
- Machine and fixture components
- Joints
- Magnets
- Buffer elements
- Level indicators, screw plugs
- Scales, scale rings, level vials
- Material handling
- Tools, workshop supplies
- Hygiene Shield
- Clamping technology
- Special solutions
- Classic products
|
|
|
K1840Positioning bushes, steel or stainless steel for status sensor |
go back |
|
Item description/product images |
|
|
DescriptionProduct description:Positioning bushes form a locating point for pin type operating and indexing elements and enable these to be securely and precisely engaged herein.
The positioning bushes for status sensor have a locknut for installing a Ø3 mm sensor into the bush.
The sensor enables electronic feedback as to whether a pin is located in the positioning bush or not.
When using several bushes, it can be determined in which one an operating or indexing element is located.Material:Positioning bush steel or stainless steel 1.4034.
Locknut brass. Version:Positioning bush:
Hardened and black oxidised steel.
Hardened, bright stainless steel.
Locknut nickel-plated.Note:Matched to mounting bracket K0638.
The locknut is supplied loose.
Max. tightening torque for the locknut: 1.2 Nm.Application:Positioning bushes in conjunction with a status sensor enable actuation-dependent process control. In addition, it can be determined whether the operating or indexing element is in the desired position.
For example, by the format adjustment on packaging machines.Assembly:The sensor is fastened into the bush using the locknut and then adjusted axially. The locknut is tightened to fixate the sensor in the final position.
The detailed procedure is described in the installation instructions.Drawing reference:Form A: full thread
Form B: with thread and collar
Form C: with thread and approach taper
Form D: smooth DownloadHere is all the information as a PDF datasheet:
Are you looking for CAD data? These can be found directly in the product table.
|
Drawings (total overview) |
Positioning bushes, steel or stainless steel for status sensor, Form A, full thread |
More information |
| Order No. | Form | Form definition | Main
material | D
| D1 | D3 | H | H3 | T | T1 | SW1 | SW2 | CAD | Acc. | Price | Order |
|---|
| K1840.103101 | A | Full thread | steel | 3 | M10x1 | 3 | 12 | 4 | 7 | 4 | 3 | 5 |  | | 0.00 € | | | K1840.104101 | A | Full thread | steel | 4 | M10x1 | 3 | 12 | 4 | 7 | 4 | 4 | 5 | | | 0.00 € | | | K1840.105121 | A | Full thread | steel | 5 | M12x1,5 | 3 | 15 | 4 | 11 | 4 | 5 | 5 | | | 0.00 € | | | K1840.106121 | A | Full thread | steel | 6 | M12x1,5 | 3 | 15 | 4 | 11 | 4 | 6 | 5 | | | 0.00 € | | | K1840.108161 | A | Full thread | steel | 8 | M16x1,5 | 3 | 20 | 4 | 15,5 | 6 | 8 | 5 | | | 0.00 € | | | K1840.110161 | A | Full thread | steel | 10 | M16x1,5 | 3 | 20 | 4 | 15,5 | 6 | 10 | 5 | | | 0.00 € | | | K1840.112201 | A | Full thread | steel | 12 | M20x1,5 | 3 | 25 | 4 | 19 | 6 | 12 | 5 | | | 0.00 € | | | K1840.116241 | A | Full thread | steel | 16 | M24x2 | 3 | 32 | 4 | 25 | 8 | 16 | 5 | | | 0.00 € | | | K1840.1103101 | A | Full thread | stainless steel | 3 | M10x1 | 3 | 12 | 4 | 7 | 4 | 3 | 5 | | | 0.00 € | | | K1840.1104101 | A | Full thread | stainless steel | 4 | M10x1 | 3 | 12 | 4 | 7 | 4 | 4 | 5 | | | 0.00 € | | | K1840.1105121 | A | Full thread | stainless steel | 5 | M12x1,5 | 3 | 15 | 4 | 11 | 4 | 5 | 5 | | | 0.00 € | | | K1840.1106121 | A | Full thread | stainless steel | 6 | M12x1,5 | 3 | 15 | 4 | 11 | 4 | 6 | 5 | | | 0.00 € | | | K1840.1108161 | A | Full thread | stainless steel | 8 | M16x1,5 | 3 | 20 | 4 | 15,5 | 6 | 8 | 5 | | | 0.00 € | | | K1840.1110161 | A | Full thread | stainless steel | 10 | M16x1,5 | 3 | 20 | 4 | 15,5 | 6 | 10 | 5 | | | 0.00 € | | | K1840.1112201 | A | Full thread | stainless steel | 12 | M20x1,5 | 3 | 25 | 4 | 19 | 6 | 12 | 5 | | | 0.00 € | | | K1840.1116241 | A | Full thread | stainless steel | 16 | M24x2 | 3 | 32 | 4 | 25 | 8 | 16 | 5 | | | 0.00 € | |
|
Positioning bushes, steel or stainless steel for status sensor, Form B, with thread and collar |
More information |
| Order No. | Form | Form definition | Main
material | D
| D1 | D3 | H | H1 | H2 | H3 | T | SW1 | SW2 | CAD | Acc. | Price | Order |
|---|
| K1840.203101 | B | with thread and collar | steel | 3 | M10x1 | 3 | 15 | 12 | 10,5 | 4 | 7 | 11 | 5 | | | 0.00 € | | | K1840.204101 | B | with thread and collar | steel | 4 | M10x1 | 3 | 15 | 12 | 10,5 | 4 | 7 | 11 | 5 | | | 0.00 € | | | K1840.205121 | B | with thread and collar | steel | 5 | M12x1,5 | 3 | 15 | 12 | 10,5 | 4 | 11 | 13 | 5 | | | 0.00 € | | | K1840.206121 | B | with thread and collar | steel | 6 | M12x1,5 | 3 | 15 | 12 | 10,5 | 4 | 11 | 13 | 5 | | | 0.00 € | | | K1840.208161 | B | with thread and collar | steel | 8 | M16x1,5 | 3 | 20 | 15 | 13,5 | 4 | 15,5 | 17 | 5 | | | 0.00 € | | | K1840.210161 | B | with thread and collar | steel | 10 | M16x1,5 | 3 | 20 | 15 | 13,5 | 4 | 15,5 | 17 | 5 | | | 0.00 € | | | K1840.212201 | B | with thread and collar | steel | 12 | M20x1,5 | 3 | 25 | 20 | 18,5 | 4 | 19 | 22 | 5 | | | 0.00 € | | | K1840.216241 | B | with thread and collar | steel | 16 | M24x2 | 3 | 32 | 27 | 25,5 | 4 | 25 | 27 | 5 | | | 0.00 € | | | K1840.1203101 | B | with thread and collar | stainless steel | 3 | M10x1 | 3 | 15 | 12 | 10,5 | 4 | 7 | 11 | 5 | | | 0.00 € | | | K1840.1204101 | B | with thread and collar | stainless steel | 4 | M10x1 | 3 | 15 | 12 | 10,5 | 4 | 7 | 11 | 5 | | | 0.00 € | | | K1840.1205121 | B | with thread and collar | stainless steel | 5 | M12x1,5 | 3 | 15 | 12 | 10,5 | 4 | 11 | 13 | 5 | | | 0.00 € | | | K1840.1206121 | B | with thread and collar | stainless steel | 6 | M12x1,5 | 3 | 15 | 12 | 10,5 | 4 | 11 | 13 | 5 | | | 0.00 € | | | K1840.1208161 | B | with thread and collar | stainless steel | 8 | M16x1,5 | 3 | 20 | 15 | 13,5 | 4 | 15,5 | 17 | 5 | | | 0.00 € | | | K1840.1210161 | B | with thread and collar | stainless steel | 10 | M16x1,5 | 3 | 20 | 15 | 13,5 | 4 | 15,5 | 17 | 5 | | | 0.00 € | | | K1840.1212201 | B | with thread and collar | stainless steel | 12 | M20x1,5 | 3 | 25 | 20 | 18,5 | 4 | 19 | 22 | 5 | | | 0.00 € | | | K1840.1216241 | B | with thread and collar | stainless steel | 16 | M24x2 | 3 | 32 | 27 | 25,5 | 4 | 25 | 27 | 5 | | | 0.00 € | |
|
Positioning bushes, steel or stainless steel for status sensor, Form C, with thread and approach taper |
More information |
| Order No. | Form | Form definition | Main
material | D
| D1 | D2 | D3 | H | H1 | H2 | H3 | T | SW1 | SW2 | CAD | Acc. | Price | Order |
|---|
| K1840.304121 | C | with thread and approach taper | steel | 4 | M12x1,5 | 19 | 3 | 16 | 12 | 10,5 | 4 | 11 | 4 | 5 | | | 0.00 € | | | K1840.305121 | C | with thread and approach taper | steel | 5 | M12x1,5 | 19 | 3 | 16 | 12 | 10,5 | 4 | 11 | 5 | 5 | | | 0.00 € | | | K1840.306121 | C | with thread and approach taper | steel | 6 | M12x1,5 | 19 | 3 | 16 | 12 | 10,5 | 4 | 11 | 6 | 5 | | | 0.00 € | | | K1840.308161 | C | with thread and approach taper | steel | 8 | M16x1,5 | 26 | 3 | 20 | 15 | 13,5 | 4 | 15,5 | 8 | 5 | | | 0.00 € | | | K1840.310161 | C | with thread and approach taper | steel | 10 | M16x1,5 | 26 | 3 | 20 | 15 | 13,5 | 4 | 15,5 | 10 | 5 | | | 0.00 € | | | K1840.1304121 | C | with thread and approach taper | stainless steel | 4 | M12x1,5 | 19 | 3 | 16 | 12 | 10,5 | 4 | 11 | 4 | 5 | | | 0.00 € | | | K1840.1305121 | C | with thread and approach taper | stainless steel | 5 | M12x1,5 | 19 | 3 | 16 | 12 | 10,5 | 4 | 11 | 5 | 5 | | | 0.00 € | | | K1840.1306121 | C | with thread and approach taper | stainless steel | 6 | M12x1,5 | 19 | 3 | 16 | 12 | 10,5 | 4 | 11 | 6 | 5 | | | 0.00 € | | | K1840.1308161 | C | with thread and approach taper | stainless steel | 8 | M16x1,5 | 26 | 3 | 20 | 15 | 13,5 | 4 | 15,5 | 8 | 5 | | | 0.00 € | | | K1840.1310161 | C | with thread and approach taper | stainless steel | 10 | M16x1,5 | 26 | 3 | 20 | 15 | 13,5 | 4 | 15,5 | 10 | 5 | | | 0.00 € | |
|
Positioning bushes, steel or stainless steel for status sensor, Form D, smooth |
More information |
| Order No. | Form | Form definition | Main
material | D
| D1 | D3 | H | H1 | H3 | T | SW2 | CAD | Acc. | Price | Order |
|---|
| K1840.403089 | D | smooth | steel | 3 | 8 | 3 | 10 | 6 | 4 | 5 | 5 | | | 0.00 € | | | K1840.404089 | D | smooth | steel | 4 | 8 | 3 | 10 | 6 | 4 | 5 | 5 | | | 0.00 € | | | K1840.405089 | D | smooth | steel | 5 | 8 | 3 | 10 | 6 | 4 | 6 | 5 | | | 0.00 € | | | K1840.406109 | D | smooth | steel | 6 | 10 | 3 | 11 | 7 | 4 | 7 | 5 | | | 0.00 € | | | K1840.408139 | D | smooth | steel | 8 | 13,5 | 3 | 14 | 9,5 | 4 | 9,5 | 5 | | | 0.00 € | | | K1840.410179 | D | smooth | steel | 10 | 17 | 3 | 16 | 11,5 | 4 | 11,5 | 5 | | | 0.00 € | | | K1840.1403089 | D | smooth | stainless steel | 3 | 8 | 3 | 10 | 6 | 4 | 5 | 5 | | | 0.00 € | | | K1840.1404089 | D | smooth | stainless steel | 4 | 8 | 3 | 10 | 6 | 4 | 5 | 5 | | | 0.00 € | | | K1840.1405089 | D | smooth | stainless steel | 5 | 8 | 3 | 10 | 6 | 4 | 6 | 5 | | | 0.00 € | | | K1840.1406109 | D | smooth | stainless steel | 6 | 10 | 3 | 11 | 7 | 4 | 7 | 5 | | | 0.00 € | | | K1840.1408139 | D | smooth | stainless steel | 8 | 13,5 | 3 | 14 | 9,5 | 4 | 9,5 | 5 | | | 0.00 € | | | K1840.1410179 | D | smooth | stainless steel | 10 | 17 | 3 | 16 | 11,5 | 4 | 11,5 | 5 | | | 0.00 € | |
|
Other items in this category |
|
| Availability Here you can check item's availability. |
Order No. changeover Here you get more information to our part number restructuringmore... |
|
