Indexing plunger, steel or stainless steel short version with...

go back

Products
- Operating parts | standard elements
  - Spring plungers, indexing plungers, ball lock pins
    - Indexing plunger
      - Indexing plunger, steel or stainless steel short version with plastic cam lever

Item description/product images

Show/filter all items

DescriptionProduct description:Indexing plungers are used where it is necessary to prevent changes of position due to lateral forces. A new locking position can be set only after the plunger has been manually disengaged. With this indexing plunger a cam lever is used to retract the pin. The indexing plunger remains unlocked as long as the handle is positioned over the dead-centre of the cam.
The ergonomic cam lever enables light handling with low effort. Material:Version:Steel version:
Threaded sleeve, black oxidised.
Indexing pin hardened, ground and black oxidised.

Stainless steel version:
Threaded sleeve, bright.
Indexing pin ground and left bright.

Grip black or traffic red RAL3020.Temperature range:Permanent operating temperature acc. to IEC 216 max. 160°C.
Short-term operating temperature max. 250°C.Advantages:Fast and simple to use.
Suitable for high temperature applications.
With integrated detent.
Short version.
Ideal for where space is restricted.On request:Special versions.Accessory:Spacer rings K0665.
Positioning bushes for indexing plunger K1290.
Fastening sets for thin-walled parts K2146.Drawing reference:

Form A: without locknut
Form B: with locknut

Special features:

DownloadHere is all the information as a PDF datasheet:

Are you looking for CAD data? These can be found directly in the product table.

Datasheet K2109 Indexing plunger, steel or stainless steel short version with plastic cam lever

166 kB

Drawings (total overview)

Indexing plunger, steel or stainless steel, short version with plastic cam lever, no locknut

More information

Drawings

Indexing plunger, steel or stainless steel, short version with plastic cam lever, no locknut

Item selection/filter

Order No.	Main material	Component colour	Form	A	A1	B	B1	D	D1	Travel S	L	L1	L2	SW1	Fx30°	Spring force initial pressure F1 approx. N	Spring force final pressure F2 approx. N
K2109.8105	0.027	abrasive blasted and electropolished	A	31,7	41,7	17,9	12,9	5	M10x1	5	30	8	7	13	1,3	5	12
K2109.8206	0.027	abrasive blasted and electropolished	A	31,6	41,7	17,9	12,9	6	M12x1,5	6	34	10	8	14	1,8	6	14
K2109.8308	0.027	abrasive blasted and electropolished	A	55,5	67,8	26,9	19,4	8	M16x1,5	8	42,9	12	10	19	2,3	14	28
K2109.8410	0.027	abrasive blasted and electropolished	A	53,4	67,8	26,9	19,4	10	M20x1,5	10	49,9	15	12	22	2,8	15	32
K2109.8105154	0.027	8 ea. No. 01, 8 ea. No. 02, 4 ea. No. 03	A	31,7	41,7	17,9	12,9	5	M10x1	5	30	8	7	13	1,3	5	12
K2109.8206154	0.027	8 ea. No. 01, 8 ea. No. 02, 4 ea. No. 03	A	31,6	41,7	17,9	12,9	6	M12x1,5	6	34	10	8	14	1,8	6	14
K2109.8308154	0.027	8 ea. No. 01, 8 ea. No. 02, 4 ea. No. 03	A	55,5	67,8	26,9	19,4	8	M16x1,5	8	42,9	12	10	19	2,3	14	28
K2109.8410154	0.027	8 ea. No. 01, 8 ea. No. 02, 4 ea. No. 03	A	53,4	67,8	26,9	19,4	10	M20x1,5	10	49,9	15	12	22	2,8	15	32
K2109.18105	3 each smooth, 1 with longitudinal prism	abrasive blasted and electropolished	A	31,7	41,7	17,9	12,9	5	M10x1	5	30	8	7	13	1,3	5	12
K2109.18206	3 each smooth, 1 with longitudinal prism	abrasive blasted and electropolished	A	31,6	41,7	17,9	12,9	6	M12x1,5	6	34	10	8	14	1,8	6	14
K2109.18308	3 each smooth, 1 with longitudinal prism	abrasive blasted and electropolished	A	55,5	67,8	26,9	19,4	8	M16x1,5	8	42,9	12	10	19	2,3	14	28
K2109.18410	3 each smooth, 1 with longitudinal prism	abrasive blasted and electropolished	A	53,4	67,8	26,9	19,4	10	M20x1,5	10	49,9	15	12	22	2,8	15	32
K2109.18105154	3 each smooth, 1 with longitudinal prism	8 (6 accessible)	A	31,7	41,7	17,9	12,9	5	M10x1	5	30	8	7	13	1,3	5	12
K2109.18206154	3 each smooth, 1 with longitudinal prism	8 (6 accessible)	A	31,6	41,7	17,9	12,9	6	M12x1,5	6	34	10	8	14	1,8	6	14
K2109.18308154	3 each smooth, 1 with longitudinal prism	8 (6 accessible)	A	55,5	67,8	26,9	19,4	8	M16x1,5	8	42,9	12	10	19	2,3	14	28
K2109.18410154	3 each smooth, 1 with longitudinal prism	8 (6 accessible)	A	53,4	67,8	26,9	19,4	10	M20x1,5	10	49,9	15	12	22	2,8	15	32

Indexing plunger, steel or stainless steel, short version with plastic can lever and locknut

More information

Drawings

Indexing plunger, steel or stainless steel, short version with plastic can lever and locknut

Item selection/filter

Order No.	Main material	Component colour	Form	A	A1	B	B1	D	D1	Travel S	L	L1	L2	SW1	SW2	Fx30°	Spring force initial pressure F1 approx. N	Spring force final pressure F2 approx. N
K2109.9105	0.027	abrasive blasted and electropolished	B	31,7	41,7	17,9	12,9	5	M10x1	5	30	8	7	13	17	1,3	5	12
K2109.9206	0.027	abrasive blasted and electropolished	B	31,6	41,7	17,9	12,9	6	M12x1,5	6	34	10	8	14	19	1,8	6	14
K2109.9308	0.027	abrasive blasted and electropolished	B	55,5	67,8	26,9	19,4	8	M16x1,5	8	42,9	12	10	19	24	2,3	14	28
K2109.9410	0.027	abrasive blasted and electropolished	B	53,4	67,8	26,9	19,4	10	M20x1,5	10	49,9	15	12	22	30	2,8	15	32
K2109.9105154	0.027	8 ea. No. 01, 8 ea. No. 02, 4 ea. No. 03	B	31,7	41,7	17,9	12,9	5	M10x1	5	30	8	7	13	17	1,3	5	12
K2109.9206154	0.027	8 ea. No. 01, 8 ea. No. 02, 4 ea. No. 03	B	31,6	41,7	17,9	12,9	6	M12x1,5	6	34	10	8	14	19	1,8	6	14
K2109.9308154	0.027	8 ea. No. 01, 8 ea. No. 02, 4 ea. No. 03	B	55,5	67,8	26,9	19,4	8	M16x1,5	8	42,9	12	10	19	24	2,3	14	28
K2109.9410154	0.023	8 (6 accessible)	B	53,4	67,8	26,9	19,4	10	M20x1,5	10	49,9	15	12	22	30	2,8	15	32
K2109.19105	3 each smooth, 1 with longitudinal prism	abrasive blasted and electropolished	B	31,7	41,7	17,9	12,9	5	M10x1	5	30	8	7	13	17	1,3	5	12
K2109.19206	3 each smooth, 1 with longitudinal prism	abrasive blasted and electropolished	B	31,6	41,7	17,9	12,9	6	M12x1,5	6	34	10	8	14	19	1,8	6	14
K2109.19308	3 each smooth, 1 with longitudinal prism	abrasive blasted and electropolished	B	55,5	67,8	26,9	19,4	8	M16x1,5	8	42,9	12	10	19	24	2,3	14	28
K2109.19410	3 each smooth, 1 with longitudinal prism	abrasive blasted and electropolished	B	53,4	67,8	26,9	19,4	10	M20x1,5	10	49,9	15	12	22	30	2,8	15	32
K2109.19105154	3 each smooth, 1 with longitudinal prism	8 (6 accessible)	B	31,7	41,7	17,9	12,9	5	M10x1	5	30	8	7	13	17	1,3	5	12
K2109.19206154	3 each smooth, 1 with longitudinal prism	8 (6 accessible)	B	31,6	41,7	17,9	12,9	6	M12x1,5	6	34	10	8	14	19	1,8	6	14
K2109.19308154	3 each smooth, 1 with longitudinal prism	8 (6 accessible)	B	55,5	67,8	26,9	19,4	8	M16x1,5	8	42,9	12	10	19	24	2,3	14	28
K2109.19410154	3 each smooth, 1 with longitudinal prism	8 (6 accessible)	B	53,4	67,8	26,9	19,4	10	M20x1,5	10	49,9	15	12	22	30	2,8	15	32