- Operating parts | standard elements
- Clamping levers, tension levers, cam levers
- Grips, knobs
- Pull handles, tubular handles, recessed handles
- Handwheels, crank handles, position indicators
- Quarter-turn locks, edge protection profiles
- Hinges
- Swivel feet, levelling feet
- Tube connectors, profile connectors
- Telescopic slides
- Latches, snap locks, slam latches
- Toggle clamps, power clamps
- Clamping elements
- Spring plungers, indexing plungers, ball lock pins
- Support elements, locating elements, stop elements
- Machine and fixture components
- Screws, nuts and washers
- K0756
T-thrust screws with fixed or sliding T-bar, DIN 6304 or DIN 6306
- K0584
Clamping force intensifiers
- K1798
Aluminium cap for holes and screw heads with hex socket
- K1418
Eye bolts DIN 444, Form B with long thread
- K1960
Threaded rods steel and stainless steel DIN 976-1
- K0708
Screws with countersunk head hexagon socket DIN EN ISO 10642
- K1159
Socket head screws full thread, DIN 912
- K0869
Socket head screws DIN EN ISO 4762 with thread lock
- K0869
Socket head screws DIN EN ISO 4762 enhanced, steel or stainless steel
- K1160
Socket head screws with low head DIN 6912
- K0396
Eye bolts DIN 444, Form B
- K0404
Studs with screw-in stop for gluing in
- K0405
Stud sets with screw-in stop for gluing in
- K0755
Tommy bars with fixed or sliding T-bar, DIN 6305 or DIN 6307
- K0697
Studs DIN 6379
- K1910
Studs
- K0698
T-slot bolts DIN 787
- K0699
T-slot bolts DIN 787, 12.9
- K0870
Hexagon head bolts DIN 931/ISO 4014
- K0871
Hexagon head bolts DIN 933/ISO 4017
- K1161
Hexagon head bolts with flange DIN EN 1665
- K1796
Button head screws, EN ISO 7380
- K1493
Stainless steel cap nuts with collar for Hygienic USIT® seal and shim washers
- K1327
Hexagon head bolts with collar for Hygienic USIT® sealing and shim washer Freudenberg Process Seals
- K1492
Stainless steel hexagon head bolts with collar for Hygienic USIT® seal and shim washers
- K1595
Stainless steel hexagon head bolts with collar and seal and shim washer for Hygienic USIT® set
- K1594
Stainless steel cap nuts with collar and seal and shim washer for Hygienic USIT® set
- K1491
Hygienic USIT® seal and shim washers
- K1647
Hexagon head bolts, stainless steel with seal washer in Hygienic DESIGN
- K1648
Hex nuts, stainless steel with seal washer in Hygienic DESIGN
- K1822
Spacer sleeves, stainless steel with seal washer in Hygienic DESIGN
- K1649
Seal washers in Hygienic DESIGN
- K1329
Ball head screw in Hygienic DESIGN
- K1411
Hexagon head bolts, stainless steel in Hygienic DESIGN
- K1330
Hexagon head bolts with narrow shaft in Hygienic DESIGN
- K1332
Cap nuts compact in Hygienic DESIGN
- K0700
Hexagon nuts thin DIN 439 / ISO 4035
- K1145
Hexagon nuts DIN 934
- K1147
Hexagon nuts with polyamide thread lock high type, DIN 982 enhanced
- K1148
Hexagon nuts with polyamide thread lock, thin type DIN 985 enhanced
- K1146
Hexagon nuts with thread lock DIN 980 enhanced
- K1797
Hexagon nuts with flange DIN 6923 / EN 1661 enhanced
- K2030
Cover caps plastic for hex bolts and nuts
- K0701
Hexagon nuts with collar height 1.5xD, DIN 6331 enhanced
- K0702
Hexagon nuts height 1.5xD, DIN 6330 enhanced
- K0794
Hexagon nuts with spherical seat
- K1800
Hex cap nut, high style DIN 1587 steel or stainless steel
- K1801
Hex cap nut, low style DIN 917 steel or stainless steel
- K1917
Slotted round nuts DIN 1804
- K2060
Slotted round nuts, steel or stainless steel, DIN 981
- K2063
Locking plate steel or stainless steel DIN 5406
- K2062
Locking plate steel DIN 462
- K2059
Slotted round nuts, steel, DIN 70852
- K2061
Locking plate steel DIN 70952
- K1918
Slotted nuts with elastic lock
- K0868
Washers medium, DIN EN ISO 7089 A
- K2099
DIN 433 washer, steel or stainless steel
- K1150
Washers with large OD DIN 9021
- K1151
Shim washers DIN 988
- K1968
Washers DIN 7349 for bolts used for heavy-duty applications
- K1526
Washers plastic captive
- K1938
Circlips for shafts DIN 471
- K1939
Circlips for bores DIN 472
- K1940
Circlips E-type DIN 6799
- K0730
C-washers DIN 6372 enhanced
- K0703
C-washers captive DIN 6371
- K0704
Shoulder screws with slotted flat head DIN 923
- K0705
Shoulder screws similar to ISO 7379
- K0706
Shoulder screws with hexagon head similar to DIN 609
- K1908
Cylindrical pins DIN 6325
- K2013
Dowel pins ISO 2338
- K1909
Cylindrical pins with internal thread DIN EN ISO 8735
- K0707
Grub screws with flat point hexagon socket DIN EN ISO 4026
- K0797
Grub screw with hexagon socket and pointed end DIN EN ISO 4027
- K2052
Grub screws with hex socket and pin DIN EN ISO 4028
- Threaded Inserts
- Drill bushes
- Connector for profiles and profile systems
- Shaft collars, locking rings and clamping hubs
- Machine and fixture component accessories
- Couplings
- Joints
- Magnets
- Buffer elements
- Level indicators, screw plugs
- Scales, scale rings, level vials
- Material handling
- Tools, workshop supplies
- Hygiene Shield
- Clamping technology
- Special solutions
- Classic products
- Order number, changeover
|
|
K1594Stainless steel cap nuts with collar and seal and shim washer... |
go back |
|
Item description/product images |
|
|
DescriptionProduct description:Set: cap nut with collar K1493 + Hygienic USIT® seal and shim washer K1491.
Only the combination of a cap nut with collar and the Hygienic USIT® seal and shim washer assures a cavity-free seal.
The cap nut with collar for Hygienic USIT® seal and shim washers is ideal for fastening in sterile areas and also conform to EHEDG regulations, which is confirmed with the relevant certificate. Material:Cap nut: stainless steel 1.4404.
Washer: stainless steel 1.4404.
Seal ring:
70 EPDM 295 (black).
70 EPDM 253815 (white).
75 Fluoroprene® XP 45 (blue). Version:Cap nut: polished.Note:The EHEDG certificate is only valid when a combination of cap nut with collar K1493 and specially matched Hygienic USIT® seal and shim washer K1491 is used. Attention:The function of the Hygienic USIT® screw connection system has been tested in combination with stainless steel materials and standard cleaning materials. The user must check that it is suitable for the application in question. Accessory:Hexagon head screw with collar K1492. Sockets with plastic inserts K1361. Ring/open-end spanner with protective caps K1362.Special features: DownloadHere is all the information as a PDF datasheet:
Are you looking for CAD data? These can be found directly in the product table.
|
Order No. | Component material | Component colour | D | D1 | D2 | D3 | H | R | S | SW | T | Approval / Certification | CAD | Acc. | Price | Order |
---|
K1594.041 | 70 EPDM 295 | black | M4 | 10,8 | 9,7 | 4,1 | 9 | 0,45 | 1 | 7 | 4,8 | EHEDG | | | on request | | K1594.051 | 70 EPDM 295 | black | M5 | 11,8 | 10,7 | 5,1 | 11 | 0,5 | 1 | 8 | 6 | EHEDG | | | on request | | K1594.061 | 70 EPDM 295 | black | M6 | 14 | 13,1 | 6,1 | 13 | 0,55 | 1 | 10 | 7,2 | EHEDG | | | on request | | K1594.081 | 70 EPDM 295 | black | M8 | 18 | 16,9 | 8,1 | 16 | 0,6 | 1 | 13 | 9,6 | EHEDG | | | on request | | K1594.101 | 70 EPDM 295 | black | M10 | 22 | 21,2 | 10,1 | 20 | 0,75 | 1,5 | 16 | 12 | EHEDG | | | on request | | K1594.121 | 70 EPDM 295 | black | M12 | 26,6 | 25,5 | 12,1 | 23 | 0,9 | 1,5 | 18 | 14,4 | EHEDG | | | on request | | K1594.161 | 70 EPDM 295 | black | M16 | 35 | 33,9 | 16,1 | 30 | 1,2 | 1,5 | 24 | 19,2 | EHEDG | | | on request | | K1594.042 | 70 EPDM 253815 | white | M4 | 10,8 | 9,7 | 4,1 | 9 | 0,45 | 1 | 7 | 4,8 | EHEDG | | | on request | | K1594.052 | 70 EPDM 253815 | white | M5 | 11,8 | 10,7 | 5,1 | 11 | 0,5 | 1 | 8 | 6 | EHEDG | | | on request | | K1594.062 | 70 EPDM 253815 | white | M6 | 14 | 13,1 | 6,1 | 13 | 0,55 | 1 | 10 | 7,2 | EHEDG | | | on request | | K1594.082 | 70 EPDM 253815 | white | M8 | 18 | 16,9 | 8,1 | 16 | 0,6 | 1 | 13 | 9,6 | EHEDG | | | on request | | K1594.102 | 70 EPDM 253815 | white | M10 | 22 | 21,2 | 10,1 | 20 | 0,75 | 1,5 | 16 | 12 | EHEDG | | | on request | | K1594.122 | 70 EPDM 253815 | white | M12 | 26,6 | 25,5 | 12,1 | 23 | 0,9 | 1,5 | 18 | 14,4 | EHEDG | | | on request | | K1594.162 | 70 EPDM 253815 | white | M16 | 35 | 33,9 | 16,1 | 30 | 1,2 | 1,5 | 24 | 19,2 | EHEDG | | | on request | | K1594.044 | fluoroprene XP 45 | blue | M4 | 10,8 | 9,7 | 4,1 | 9 | 0,45 | 1 | 7 | 4,8 | EHEDG | | | on request | | K1594.054 | fluoroprene XP 45 | blue | M5 | 11,8 | 10,7 | 5,1 | 11 | 0,5 | 1 | 8 | 6 | EHEDG | | | on request | | K1594.064 | fluoroprene XP 45 | blue | M6 | 14 | 13,1 | 6,1 | 13 | 0,55 | 1 | 10 | 7,2 | EHEDG | | | on request | | K1594.084 | fluoroprene XP 45 | blue | M8 | 18 | 16,9 | 8,1 | 16 | 0,6 | 1 | 13 | 9,6 | EHEDG | | | on request | | K1594.104 | fluoroprene XP 45 | blue | M10 | 22 | 21,2 | 10,1 | 20 | 0,75 | 1,5 | 16 | 12 | EHEDG | | | on request | | K1594.124 | fluoroprene XP 45 | blue | M12 | 26,6 | 25,5 | 12,1 | 23 | 0,9 | 1,5 | 18 | 14,4 | EHEDG | | | on request | | K1594.164 | fluoroprene XP 45 | blue | M16 | 35 | 33,9 | 16,1 | 30 | 1,2 | 1,5 | 24 | 19,2 | EHEDG | | | on request | |
Other items in this category |
|
Availability Here you can check item's availability. |
|