One-piece shaft collars slitted inside

go back

Products
- Operating parts | standard elements
  - Machine and fixture components
    - Shaft collars, locking rings and clamping hubs
      - One-piece shaft collars slitted inside

Item description/product images

DescriptionMaterial:

Steel.
Stainless steel 1.4305.
Stainless steel 1.4404.
Aluminium.

Version:Steel black oxidised, screw steel 12.9.
Stainless steel 1.4305 bright, screw stainless steel A2-70.
Stainless steel 1.4404 bright, screw stainless steel A4-70.
Aluminium bright, screw stainless steel A2-70.Note:One-piece shaft collars with an inner slit surround the shaft with an equal distribution of the clamping force. This leads to a very precise fit and high retaining force without damaging the shaft.

The shaft tolerance should lie within h11.

The shaft collars made of A4 stainless steel have a small centre point mark on the OD.Temperature range:-40 °C - +175 °C.On request:Other dimensions.Special features:

DownloadHere is all the information as a PDF datasheet:

Are you looking for CAD data? These can be found directly in the product table.

Datasheet K0611 One-piece shaft collars slitted inside

235 kB

Drawings

Item selection/filter

Order No.	Form definition	Main material	B	C (DIN 912)	D1	D2	R	Price
K0611.00401	Pull-down jaw	0.0019	9	M3x8	4	16	20,7	on request
K0611.00501	Pull-down jaw	0.0019	9	M3x8	5	16	20,7	on request
K0611.00601	Pull-down jaw	0.0019	9	M3x8	6	16	20,7	on request
K0611.00801	Pull-down jaw	0.0019	9	M3x8	8	18	22,4	on request
K0611.01001	Pull-down jaw	0.0019	9	M3x10	10	24	26	on request
K0611.01201	Pull-down jaw	0.0019	11	M4x12	12	28	31,8	on request
K0611.01501	Pull-down jaw	0.0019	13	M5x16	15	34	39,4	on request
K0611.01601	Pull-down jaw	0.0019	13	M5x16	16	34	39,4	on request
K0611.01801	Pull-down jaw	0.0019	13	M5x16	18	36	41,1	on request
K0611.02001	Pull-down jaw	0.0019	15	M6x18	20	40	46,4	on request
K0611.02201	Pull-down jaw	0.0019	15	M6x18	22	42	48,1	on request
K0611.02501	Pull-down jaw	0.0019	15	M6x18	25	45	50,8	on request
K0611.02801	Pull-down jaw	0.0019	15	M6x18	28	48	53,7	on request
K0611.03001	Pull-down jaw	0.0019	15	M6x18	30	54	58,6	on request
K0611.04001	Pull-down jaw	0.0019	15	M6x18	40	60	65	on request
K0611.05001	Pull-down jaw	0.0019	19	M8x25	50	78	87	on request
K0611.00402	Pull-down jaw	22012-10321	9	M3x8	4	16	20,7	on request
K0611.00502	Pull-down jaw	22012-10321	9	M3x8	5	16	20,7	on request
K0611.00602	Pull-down jaw	22012-10321	9	M3x8	6	16	20,7	on request
K0611.00802	Pull-down jaw	22012-10321	9	M3x8	8	18	22,4	on request
K0611.01002	Pull-down jaw	22012-10321	9	M3x10	10	24	26	on request
K0611.01202	Pull-down jaw	22012-10321	11	M4x12	12	28	31,8	on request
K0611.01502	Pull-down jaw	22012-10321	13	M5x16	15	34	39,4	on request
K0611.01602	Pull-down jaw	22012-10321	13	M5x16	16	34	39,4	on request
K0611.01802	Pull-down jaw	22012-10321	13	M5x16	18	36	41,1	on request
K0611.02002	Pull-down jaw	22012-10321	15	M6x18	20	40	46,4	on request
K0611.02202	Pull-down jaw	22012-10321	15	M6x18	22	42	48,1	on request
K0611.02502	Pull-down jaw	22012-10321	15	M6x18	25	45	50,8	on request
K0611.02802	Pull-down jaw	22012-10321	15	M6x18	28	48	53,7	on request
K0611.03002	Pull-down jaw	22012-10321	15	M6x18	30	54	58,6	on request
K0611.04002	Pull-down jaw	22012-10321	15	M6x18	40	60	65	on request
K0611.05002	Pull-down jaw	22012-10321	19	M8x25	50	78	87	on request
K0611.00404	Pull-down jaw	Clamping width 50 mm, width approx. 20 mm	9	M3x8	4	16	20,7	on request
K0611.00504	Pull-down jaw	Clamping width 50 mm, width approx. 20 mm	9	M3x8	5	16	20,7	on request
K0611.00604	Pull-down jaw	Clamping width 50 mm, width approx. 20 mm	9	M3x8	6	16	20,7	on request
K0611.00804	Pull-down jaw	Clamping width 50 mm, width approx. 20 mm	9	M3x8	8	18	22,4	on request
K0611.01004	Pull-down jaw	Clamping width 50 mm, width approx. 20 mm	9	M3x10	10	24	26	on request
K0611.01204	Pull-down jaw	Clamping width 50 mm, width approx. 20 mm	11	M4x12	12	28	31,8	on request
K0611.01504	Pull-down jaw	Clamping width 50 mm, width approx. 20 mm	13	M5x16	15	34	39,4	on request
K0611.01604	Pull-down jaw	Clamping width 50 mm, width approx. 20 mm	13	M5x16	16	34	39,4	on request
K0611.01804	Pull-down jaw	Clamping width 50 mm, width approx. 20 mm	13	M5x16	18	36	41,1	on request
K0611.02004	Pull-down jaw	Clamping width 50 mm, width approx. 20 mm	15	M6x18	20	40	46,4	on request
K0611.02204	Pull-down jaw	Clamping width 50 mm, width approx. 20 mm	15	M6x18	22	42	48,1	on request
K0611.02504	Pull-down jaw	Clamping width 50 mm, width approx. 20 mm	15	M6x18	25	45	50,8	on request
K0611.02804	Pull-down jaw	Clamping width 50 mm, width approx. 20 mm	15	M6x18	28	48	53,7	on request
K0611.03004	Pull-down jaw	Clamping width 50 mm, width approx. 20 mm	15	M6x18	30	54	58,6	on request
K0611.04004	Pull-down jaw	Clamping width 50 mm, width approx. 20 mm	15	M6x18	40	60	65	on request
K0611.05004	Pull-down jaw	Clamping width 50 mm, width approx. 20 mm	19	M8x25	50	78	87	on request
K0611.00403	Pull-down jaw	acetone	9	M3x8	4	16	20,7	on request
K0611.00503	Pull-down jaw	acetone	9	M3x8	5	16	20,7	on request
K0611.00603	Pull-down jaw	acetone	9	M3x8	6	16	20,7	on request
K0611.00803	Pull-down jaw	acetone	9	M3x8	8	18	22,4	on request
K0611.01003	Pull-down jaw	acetone	9	M3x10	10	24	26	on request
K0611.01203	Pull-down jaw	acetone	11	M4x12	12	28	31,8	on request
K0611.01503	Pull-down jaw	acetone	13	M5x16	15	34	39,4	on request
K0611.01603	Pull-down jaw	acetone	13	M5x16	16	34	39,4	on request
K0611.01803	Pull-down jaw	acetone	13	M5x16	18	36	41,1	on request
K0611.02003	Pull-down jaw	acetone	15	M6x18	20	40	46,4	on request
K0611.02203	Pull-down jaw	acetone	15	M6x18	22	42	48,1	on request
K0611.02503	Pull-down jaw	acetone	15	M6x18	25	45	50,8	on request
K0611.02803	Pull-down jaw	acetone	15	M6x18	28	48	53,7	on request
K0611.03003	Pull-down jaw	acetone	15	M6x18	30	54	58,6	on request
K0611.04003	Pull-down jaw	acetone	15	M6x18	40	60	65	on request
K0611.05003	Pull-down jaw	acetone	19	M8x25	50	78	87	on request