- Operating parts | standard elements
- Clamping levers, tension levers, cam levers
- Grips, knobs
- Pull handles, tubular handles, recessed handles
- Handwheels, crank handles, position indicators
- Quarter-turn locks, edge protection profiles
- Hinges
- Swivel feet, levelling feet
- Tube connectors, profile connectors
- Telescopic slides
- Latches, snap locks, slam latches
- Toggle clamps, power clamps
- Clamping elements
- Spring plungers, indexing plungers, ball lock pins
- Support elements, locating elements, stop elements
- Machine and fixture components
- Screws, nuts and washers
- K0756
T-thrust screws
with fixed or sliding T-bar, DIN 6304 or DIN 6306
- K0584
Clamping force intensifiers
- K1798
Aluminium cap
for holes and screw heads with hex socket
- K1418
Eye bolts DIN 444, Form B
with long thread
- K1960
Threaded rods
steel and stainless steel DIN 976-1
- K0708
Screws with countersunk head
hexagon socket DIN EN ISO 10642
- K1159
Socket head screws
full thread, DIN 912
- K0869
Socket head screws
DIN EN ISO 4762 with thread lock
- K0869
Socket head screws
DIN EN ISO 4762 enhanced, steel or stainless steel
- K1160
Socket head screws with low head
DIN 6912
- K0396
Eye bolts
DIN 444, Form B
- K0404
Studs
with screw-in stop for gluing in
- K0405
Stud sets
with screw-in stop for gluing in
- K0755
Tommy bars
with fixed or sliding T-bar, DIN 6305 or DIN 6307
- K0697
Studs
DIN 6379
- K1910
Studs
- K0698
T-slot bolts
DIN 787
- K0699
T-slot bolts
DIN 787, 12.9
- K0870
Hexagon head bolts
DIN 931/ISO 4014
- K0871
Hexagon head bolts
DIN 933/ISO 4017
- K1161
Hexagon head bolts with flange
DIN EN 1665
- K1796
Button head screws, EN ISO 7380
- K1493
Stainless steel cap nuts with collar
for Hygienic USIT® seal and shim washers
- K1327
Hexagon head bolts with collar
for Hygienic USIT® sealing and shim washer Freudenberg Process Seals
- K1492
Stainless steel hexagon head bolts with collar
for Hygienic USIT® seal and shim washers
- K1595
Stainless steel hexagon head bolts with collar
and seal and shim washer for Hygienic USIT® set
- K1594
Stainless steel cap nuts with collar
and seal and shim washer for Hygienic USIT® set
- K1491
Hygienic USIT® seal and shim washers
- K1647
Hexagon head bolts, stainless steel with seal washer
in Hygienic DESIGN
- K1648
Hex nuts, stainless steel with seal washer
in Hygienic DESIGN
- K1822
Spacer sleeves, stainless steel with seal washer
in Hygienic DESIGN
- K1649
Seal washers
in Hygienic DESIGN
- K1329
Ball head screw
in Hygienic DESIGN
- K1411
Hexagon head bolts, stainless steel
in Hygienic DESIGN
- K1330
Hexagon head bolts with narrow shaft
in Hygienic DESIGN
- K1332
Cap nuts compact
in Hygienic DESIGN
- K0700
Hexagon nuts thin
DIN 439 / ISO 4035
- K1145
Hexagon nuts
DIN 934
- K1147
Hexagon nuts with polyamide thread lock
high type, DIN 982 enhanced
- K1148
Hexagon nuts with polyamide thread lock, thin type
DIN 985 enhanced
- K1146
Hexagon nuts with thread lock
DIN 980 enhanced
- K1797
Hexagon nuts with flange
DIN 6923 / EN 1661 enhanced
- K2030
Cover caps plastic
for hex bolts and nuts
- K0701
Hexagon nuts with collar
height 1.5xD, DIN 6331 enhanced
- K0702
Hexagon nuts
height 1.5xD, DIN 6330 enhanced
- K0794
Hexagon nuts
with spherical seat
- K1800
Hex cap nut, high style DIN 1587
steel or stainless steel
- K1801
Hex cap nut, low style DIN 917
steel or stainless steel
- K1917
Slotted round nuts
DIN 1804
- K2060
Slotted round nuts, steel or stainless steel,
DIN 981
- K2063
Locking plate steel or stainless steel
DIN 5406
- K2062
Locking plate steel DIN 462
- K2059
Slotted round nuts, steel,
DIN 70852
- K2061
Locking plate steel DIN 70952
- K1918
Slotted nuts
with elastic lock
- K0868
Washers
medium, DIN EN ISO 7089 A
- K2099
DIN 433 washer, steel or stainless steel
- K1150
Washers with large OD
DIN 9021
- K1151
Shim washers
DIN 988
- K1968
Washers DIN 7349 for bolts used for heavy-duty applications
- K1526
Washers plastic
captive
- K1938
Circlips for shafts
DIN 471
- K1939
Circlips for bores
DIN 472
- K1940
Circlips E-type
DIN 6799
- K0730
C-washers
DIN 6372 enhanced
- K0703
C-washers captive
DIN 6371
- K0704
Shoulder screws with slotted flat head
DIN 923
- K0705
Shoulder screws
similar to ISO 7379
- K0706
Shoulder screws
with hexagon head similar to DIN 609
- K1908
Cylindrical pins
DIN 6325
- K2013
Dowel pins ISO 2338
- K1909
Cylindrical pins with internal thread
DIN EN ISO 8735
- K0707
Grub screws with flat point
hexagon socket DIN EN ISO 4026
- K0797
Grub screw with hexagon socket and pointed end
DIN EN ISO 4027
- K2052
Grub screws with hex socket and pin
DIN EN ISO 4028
- Threaded Inserts
- Drill bushes
- Connector for profiles and profile systems
- Shaft collars, locking rings and clamping hubs
- Machine and fixture component accessories
- Couplings
- Seals
- Joints
- Magnets
- Buffer elements
- Level indicators, screw plugs
- Scales, scale rings, level vials
- Material handling
- Tools, workshop supplies
- Hygiene Shield
- Clamping technology
- Special solutions
- Classic products
- Order number, changeover
|
|
|
K1822Spacer sleeves, stainless steel with seal washer in Hygienic... |
go back |
|
Item description/product images |
|
|
DescriptionProduct description:The Hygienic DESIGN spacer sleeve was specially developed for use in food-processing facilities. Special emphasis has been placed on the cleaning-optimised geometry and a surface finish of Ra ≤ 0.8 µm. The sealing washer made from foodstuff conform plastic is exchangable.Material:Spacer sleevestainless steel 1.4404.
Sealing washer: EU10/2011 and FDA conform thermoplastic (POM). Version:Spacer sleeve: unpolished stainless steel.
Sealing washer: RAL5002 - Ultramarine blue (POM).Note:The contact face for the sealing washer must ideally be flat and perpendicular to the threaded hole and have a surface finish of Ra ≤ 0.8 µm.
Sealing washer is unsuitable for acidic cleaning (pH < 4) and oxidising agents.
The suitability of the Hygienic DESIGN spacer sleeves for the respective application must be checked by the user. Depending on the loads and external influences (temperature, cleaning media, product media), the sealing washer should be inspected regularly and replaced if necessary.Temperature range:-20 °C to +100 °C (POM).Advantages:Exchangable seal washer.
Foodstuff conform material.
Cleaning optimised geometry.Accessory:Sealing washer K1649.
Stainless steel hex head bolt with sealing washer K1647.
Stainless steel hex nut with sealing washer K1648.Supplied withSpacer sleeves incl. sealing washer.Drawing reference:1) Spacer sleeve
2) Sealing washer DownloadHere is all the information as a PDF datasheet:
Are you looking for CAD data? These can be found directly in the product table.
|
| Order No. | L | D
| D1 | D2 | H | R | CAD | Acc. | Price | Order |
|---|
| K1822.11106X30 | 30 | 6,4 | 14 | 15,74 | 2,5 | 3,5 |  | | on request | | | K1822.11106X40 | 40 | 6,4 | 14 | 15,74 | 2,5 | 3,5 | | | on request | | | K1822.11106X50 | 50 | 6,4 | 14 | 15,74 | 2,5 | 3,5 | | | on request | | | K1822.11108X30 | 30 | 8,4 | 18 | 19,74 | 2,5 | 3,5 | | | on request | | | K1822.11108X40 | 40 | 8,4 | 18 | 19,74 | 2,5 | 3,5 | | | on request | | | K1822.11108X50 | 50 | 8,4 | 18 | 19,74 | 2,5 | 3,5 | | | on request | | | K1822.11110X30 | 30 | 10,5 | 22 | 23,74 | 2,5 | 3,5 | | | on request | | | K1822.11110X40 | 40 | 10,5 | 22 | 23,74 | 2,5 | 3,5 | | | on request | | | K1822.11110X50 | 50 | 10,5 | 22 | 23,74 | 2,5 | 3,5 | | | on request | | | K1822.11112X30 | 30 | 13 | 26 | 28,25 | 3 | 4 | | | on request | | | K1822.11112X40 | 40 | 13 | 26 | 28,25 | 3 | 4 | | | on request | | | K1822.11112X50 | 50 | 13 | 26 | 28,25 | 3 | 4 | | | on request | |
Other items in this category |
|
| Availability Here you can check item's availability. |
|
