- Operating parts | standard elements
- Clamping levers, tension levers, cam levers
- Grips, knobs
- Pull handles, tubular handles, recessed handles
- Handwheels, crank handles, position indicators
- Quarter-turn locks, edge protection profiles
- Hinges
- Swivel feet, levelling feet
- Tube connectors, profile connectors
- Telescopic slides
- Latches, snap locks, slam latches
- Toggle clamps, power clamps
- Clamping elements
- Spring plungers, indexing plungers, ball lock pins
- Spring plungers
- Indexing plunger
- K2047
Indexing plungers steel or stainless steel
with plastic eyelet grip
- K1502
Indexing plungers, stainless steel with plastic mushroom grip and remote actuation
- K2042
Bowden cable distributor
for indexing plungers with remote actuation
- K2023
Wire cables
with end piece
- K2024
Traction sleeves
with inner tube
- K2025
End sleeves
- K2026
Setscrews
- K2027
Screw nipples
locked with grub screw
- K1584
Indexing plungers, steel or stainless steel with plastic cam lever
- K1744
Indexing plungers steel or stainless steel with plastic mushroom grip and status sensor, hardwired
- K1495
Indexing plungers, steel or stainless steel with status sensor and plastic mushroom grip
- K1845
Magnetic base
for WLAN antenna
- K1846
Extension cable
for WLAN antenna
- K0338
Indexing plungers
- K1096
Indexing plungers, steel or stainless steel with plastic mushroom grip and thread lock
- K1149
Indexing plungers, steel with plastic mushroom grip and locked mark
- K1213
Indexing plungers, steel or stainless steel with plastic mushroom grip and lock
- K0630
Indexing plungers, steel or stainless steel, with plastic mushroom grip extended indexing pin and load slot
- K0631
Indexing plungers, steel or stainless steel, short version with plastic mushroom grip
- K1097
Indexing plungers, steel or stainless steel, short version with plastic mushroom grip and thread lock
- K1698
Indexing plungers, stainless steel for Hygienic USIT® seal and shim washers, with stainless steel mushroom grip
- K0632
Indexing plungers, stainless steel with stainless steel mushroom grip
- K0735
Indexing plungers, steel or stainless steel for thin-walled parts, with plastic mushroom grip
- K0339
Indexing plungers, steel or stainless steel with plastic mushroom grip
- K0747
Indexing plungers ECO, steel or stainless steel, with plastic mushroom grip
- K0635
Indexing plungers, steel or stainless steel without collar, with stainless steel pull ring
- K0346
Indexing plungers, steel or stainless steel, smooth version without collar, with plastic mushroom grip
- K0347
Indexing plungers, steel or stainless steel, smooth version without collar, with plastic mushroom grip
- K0636
Indexing plungers, steel or stainless steel, smooth version without collar, with stainless steel pull ring
- K1839
Positioning bushes, steel or stainless steel
with status sensor
- K1840
Positioning bushes, steel or stainless steel
for status sensor
- K1290
Positioning bushes
for indexing plungers
- K0665
Spacer rings
- K0736
Bushes tapered
- K0736
Premium - Indexing plungers, steel or stainless steel with plastic mushroom grip and cylindrical indexing pin
- K0736
Bushes cylindrical
- K0736
Premium - Indexing plungers, steel or stainless steel with plastic mushroom grip and tapered indexing pin
- K1300
Indexing plungers, steel or stainless steel with plastic mushroom grip, rotation lock and lead-in chamfer
- K1124
Indexing plungers, steel or stainless steel with plastic T-grip
- K0359
Precision indexing plungers, steel with plastic spherical knob and tapered indexing pin
- K0360
Bushes tapered
- K0361
Precision indexing plungers, steel with plastic spherical knob and cylindrical indexing pin
- K0362
Bushes cylindrical
- K1833
Indexing plungers, steel with plastic twist knob and tapered indexing pin
- K1834
Indexing plungers, steel with plastic twist knob and tapered indexing pin
- K1835
Bushing steel, tapered
- K1098
Indexing plungers ECO, steel or stainless steel with plastic mushroom grip and thread lock
- K0748
Indexing plungers ECO, steel or stainless steel, short version with plastic mushroom grip
- K0340
Indexing plungers, steel with draw hook
- K0341
Indexing plungers, steel or stainless steel with threaded pin
- K0342
Indexing plungers, steel or stainless steel with stainless steel pull ring
- K0343
Indexing plungers, steel or stainless steel without collar, with plastic mushroom grip
- K0633
Indexing plungers, steel or stainless steel, without collar, with plastic mushroom grip, extended indexing pin and locknut
- K0634
Indexing plungers, stainless steel, without collar, with stainless steel mushroom grip
- K0344
Indexing plungers, steel or stainless steel without collar, with plastic mushroom grip
- K1116
Indexing plungers, steel or stainless steel, pneumatic
- K0344
Screw-in washer
- K0345
Indexing plungers, steel or stainless steel without collar, with threaded pin
- K1582
Indexing and clamping grips, steel with plastic star grip
- K1583
Indexing and clamping grips, steel with plastic star grip and optical lock indicator
- K0245
Indexing plungers with five lobe grip
- Cam action indexing plunger
- Ball lock pins
- Locking pins
- Retaining cables, ball chains
- Support elements, locating elements, stop elements
- Machine and fixture components
- Joints
- Magnets
- Buffer elements
- Level indicators, screw plugs
- Scales, scale rings, level vials
- Material handling
- Tools, workshop supplies
- Hygiene Shield
- Clamping technology
- Special solutions
- Classic products
- Order number, changeover
|
|
|
K1495Indexing plungers, steel or stainless steel with status sensor... |
go back |
|
|
DescriptionProduct description:Indexing plungers are used where it is necessary to prevent changes of position due to lateral forces.
Some examples of this are for length, height and position locking in machines, equipment, furniture and special vehicle construction.
For indexing plungers with status sensor, the actuation status can be detected and processed electronically.
The actuation status is transferred wirelessly by Bluetooth to a mobile terminal or the K1494 gateway.
The combination of indexing plunger with status sensor and gateway allows the signal to be processed in a machine control system, for example.
Power to the indexing plunger is supplied from an integrated button cell which can be replaced when necessary.Material:Steel version:
Threaded sleeve and indexing pin free-cutting steel.
Stainless-steel version:
Indexing pin hardened:
Threaded sleeve 1.4305.
Indexing pin 1.4034.
Indexing pin not hardened:
Threaded sleeve 1.4305.
Indexing pin 1.4305.
Mushroom knob and cover thermoplastic.Version:Steel version:
Threaded sleeve, black oxidised.
Indexing pin hardened, ground and black oxidised.
Stainless-steel version:
Threaded sleeve bright.
Indexing pin hardened, ground and bright.
Indexing pin not hardened, ground and bright.
Mushroom knob dark grey.
Cover translucent grey.Technical data:See technical information.Application:Indexing plungers with status sensor allow actuation-dependent process control. It is also possible to ensure that the indexing pin is in the desired actuation status.Advantages:Wireless transfer of actuation status.
Laborious cable connections no longer necessary.
Intelligent battery management allows long running time
No interfering edges.Accessory:K1494 GatewaySafety:Indexing plungers with status sensor are not suitable for personnel safety functions.Drawing reference:Form A: non-lockout type, without locknut
Form B: non-lockout type, with locknut
Form C: lockout type, without locknut
Form D: lockout type, with locknut DownloadHere is all the information as a PDF datasheet:
Are you looking for CAD data? These can be found directly in the product table.
|
Drawings (total overview) |
Indexing plungers, steel or stainless steel with status sensor and plastic mushroom grip |
More information |
| Order No. | Form | Main
material | Surface finish
body | D
| D1 | D2 | Travel
S | L | L1 | L2 | L3 | SW1 | Fx30° | Travel
S | Spring force
initial pressure
F1 approx. N | Spring force
final pressure
F2 approx. N | CAD | Acc. | Price | Order |
|---|
| K1495.1105 | A | steel | hardened | 5 | M10x1 | 35 | 5 | 57 | 17 | 7 | 15 | 13 | 1,3 | 5 | 5 | 12 |  | | 113.38 € | | | K1495.1206 | A | steel | hardened | 6 | M12x1,5 | 35 | 6 | 62 | 20 | 8 | 17 | 14 | 1,8 | 6 | 6 | 14 | | | 114.55 € | | | K1495.1308 | A | steel | hardened | 8 | M16x1,5 | 35 | 8 | 76 | 26 | 10 | 23 | 19 | 2,3 | 8 | 15 | 35 | | | 115.70 € | | | K1495.1410 | A | steel | hardened | 10 | M20x1,5 | 35 | 10 | 82 | 28 | 12 | 25 | 22 | 2,8 | 10 | 15 | 34 | | | 119.17 € | | | K1495.1412 | A | steel | hardened | 12 | M20x1,5 | 35 | 12 | 86 | 28 | 14 | 25 | 22 | 2,8 | 12 | 15 | 39 | | | 121.48 € | | | K1495.01105 | A | stainless steel | hardened | 5 | M10x1 | 35 | 5 | 57 | 17 | 7 | 15 | 13 | 1,3 | 5 | 5 | 12 | | | 120.33 € | | | K1495.01206 | A | stainless steel | hardened | 6 | M12x1,5 | 35 | 6 | 62 | 20 | 8 | 17 | 14 | 1,8 | 6 | 6 | 14 | | | 121.48 € | | | K1495.01308 | A | stainless steel | hardened | 8 | M16x1,5 | 35 | 8 | 76 | 26 | 10 | 23 | 19 | 2,3 | 8 | 15 | 35 | | | 124.95 € | | | K1495.01410 | A | stainless steel | hardened | 10 | M20x1,5 | 35 | 10 | 82 | 28 | 12 | 25 | 22 | 2,8 | 10 | 15 | 34 | | | 127.28 € | | | K1495.01412 | A | stainless steel | hardened | 12 | M20x1,5 | 35 | 12 | 86 | 28 | 14 | 25 | 22 | 2,8 | 12 | 15 | 39 | | | 129.59 € | | | K1495.11105 | A | stainless steel | not hardened | 5 | M10x1 | 35 | 5 | 57 | 17 | 7 | 15 | 13 | 1,3 | 5 | 5 | 12 | | | 120.33 € | | | K1495.11206 | A | stainless steel | not hardened | 6 | M12x1,5 | 35 | 6 | 62 | 20 | 8 | 17 | 14 | 1,8 | 6 | 6 | 14 | | | 121.48 € | | | K1495.11308 | A | stainless steel | not hardened | 8 | M16x1,5 | 35 | 8 | 76 | 26 | 10 | 23 | 19 | 2,3 | 8 | 15 | 35 | | | 124.95 € | | | K1495.11410 | A | stainless steel | not hardened | 10 | M20x1,5 | 35 | 10 | 82 | 28 | 12 | 25 | 22 | 2,8 | 10 | 15 | 34 | | | 127.28 € | | | K1495.11412 | A | stainless steel | not hardened | 12 | M20x1,5 | 35 | 12 | 86 | 28 | 14 | 25 | 22 | 2,8 | 12 | 15 | 39 | | | 129.59 € | |
|
Indexing plungers, steel or stainless steel with status sensor, plastic mushroom grip and locknut |
More information |
| Order No. | Form | Main
material | Surface finish
body | D
| D1 | D2 | Travel
S | L | L1 | L2 | L3 | SW1 | SW2 | Fx30° | Travel
S | Spring force
initial pressure
F1 approx. N | Spring force
final pressure
F2 approx. N | CAD | Acc. | Price | Order |
|---|
| K1495.2105 | B | steel | hardened | 5 | M10x1 | 35 | 5 | 57 | 17 | 7 | 15 | 13 | 17 | 1,3 | 5 | 5 | 12 | | | 113.38 € | | | K1495.2206 | B | steel | hardened | 6 | M12x1,5 | 35 | 6 | 62 | 20 | 8 | 17 | 14 | 19 | 1,8 | 6 | 6 | 14 | | | 114.55 € | | | K1495.2308 | B | steel | hardened | 8 | M16x1,5 | 35 | 8 | 76 | 26 | 10 | 23 | 19 | 24 | 2,3 | 8 | 15 | 35 | | | 115.70 € | | | K1495.2410 | B | steel | hardened | 10 | M20x1,5 | 35 | 10 | 82 | 28 | 12 | 25 | 22 | 30 | 2,8 | 10 | 15 | 34 | | | 119.17 € | | | K1495.2412 | B | steel | hardened | 12 | M20x1,5 | 35 | 12 | 86 | 28 | 14 | 25 | 22 | 30 | 2,8 | 12 | 15 | 39 | | | 121.48 € | | | K1495.02105 | B | stainless steel | hardened | 5 | M10x1 | 35 | 5 | 57 | 17 | 7 | 15 | 13 | 17 | 1,3 | 5 | 5 | 12 | | | 120.33 € | | | K1495.02206 | B | stainless steel | hardened | 6 | M12x1,5 | 35 | 6 | 62 | 20 | 8 | 17 | 14 | 19 | 1,8 | 6 | 6 | 14 | | | 121.48 € | | | K1495.02308 | B | stainless steel | hardened | 8 | M16x1,5 | 35 | 8 | 76 | 26 | 10 | 23 | 19 | 24 | 2,3 | 8 | 15 | 35 | | | 124.95 € | | | K1495.02410 | B | stainless steel | hardened | 10 | M20x1,5 | 35 | 10 | 82 | 28 | 12 | 25 | 22 | 30 | 2,8 | 10 | 15 | 34 | | | 127.28 € | | | K1495.02412 | B | stainless steel | hardened | 12 | M20x1,5 | 35 | 12 | 86 | 28 | 14 | 25 | 22 | 30 | 2,8 | 12 | 15 | 39 | | | 129.59 € | | | K1495.12105 | B | stainless steel | not hardened | 5 | M10x1 | 35 | 5 | 57 | 17 | 7 | 15 | 13 | 17 | 1,3 | 5 | 5 | 12 | | | 120.33 € | | | K1495.12206 | B | stainless steel | not hardened | 6 | M12x1,5 | 35 | 6 | 62 | 20 | 8 | 17 | 14 | 19 | 1,8 | 6 | 6 | 14 | | | 121.48 € | | | K1495.12308 | B | stainless steel | not hardened | 8 | M16x1,5 | 35 | 8 | 76 | 26 | 10 | 23 | 19 | 24 | 2,3 | 8 | 15 | 35 | | | 124.95 € | | | K1495.12410 | B | stainless steel | not hardened | 10 | M20x1,5 | 35 | 10 | 82 | 28 | 12 | 25 | 22 | 30 | 2,8 | 10 | 15 | 34 | | | 127.28 € | | | K1495.12412 | B | stainless steel | not hardened | 12 | M20x1,5 | 35 | 12 | 86 | 28 | 14 | 25 | 22 | 30 | 2,8 | 12 | 15 | 39 | | | 129.59 € | |
|
Indexing plungers, steel or stainless steel with status sensor, plastic mushroom grip and locking slot |
More information |
| Order No. | Form | Main
material | Surface finish
body | D
| D1 | D2 | Travel
S | L | L1 | L2 | L3 | SW1 | Fx30° | Travel
S | Spring force
initial pressure
F1 approx. N | Spring force
final pressure
F2 approx. N | CAD | Acc. | Price | Order |
|---|
| K1495.3105 | C | steel | hardened | 5 | M10x1 | 35 | 5 | 57 | 17 | 7 | 15 | 13 | 1,3 | 5 | 5 | 12 | | | 116.86 € | | | K1495.3206 | C | steel | hardened | 6 | M12x1,5 | 35 | 6 | 62 | 20 | 8 | 17 | 14 | 1,8 | 6 | 6 | 14 | | | 118.02 € | | | K1495.3308 | C | steel | hardened | 8 | M16x1,5 | 35 | 8 | 76 | 26 | 10 | 23 | 19 | 2,3 | 8 | 15 | 35 | | | 119.17 € | | | K1495.3410 | C | steel | hardened | 10 | M20x1,5 | 35 | 10 | 82 | 28 | 12 | 25 | 22 | 2,8 | 10 | 15 | 34 | | | 122.64 € | | | K1495.3412 | C | steel | hardened | 12 | M20x1,5 | 35 | 12 | 86 | 28 | 14 | 25 | 22 | 2,8 | 12 | 15 | 39 | | | 124.95 € | | | K1495.03105 | C | stainless steel | hardened | 5 | M10x1 | 35 | 5 | 57 | 17 | 7 | 15 | 13 | 1,3 | 5 | 5 | 12 | | | 123.80 € | | | K1495.03206 | C | stainless steel | hardened | 6 | M12x1,5 | 35 | 6 | 62 | 20 | 8 | 17 | 14 | 1,8 | 6 | 6 | 14 | | | 124.95 € | | | K1495.03308 | C | stainless steel | hardened | 8 | M16x1,5 | 35 | 8 | 76 | 26 | 10 | 23 | 19 | 2,3 | 8 | 15 | 35 | | | 128.43 € | | | K1495.03410 | C | stainless steel | hardened | 10 | M20x1,5 | 35 | 10 | 82 | 28 | 12 | 25 | 22 | 2,8 | 10 | 15 | 34 | | | 130.74 € | | | K1495.03412 | C | stainless steel | hardened | 12 | M20x1,5 | 35 | 12 | 86 | 28 | 14 | 25 | 22 | 2,8 | 12 | 15 | 39 | | | 133.06 € | | | K1495.13105 | C | stainless steel | not hardened | 5 | M10x1 | 35 | 5 | 57 | 17 | 7 | 15 | 13 | 1,3 | 5 | 5 | 12 | | | 123.80 € | | | K1495.13206 | C | stainless steel | not hardened | 6 | M12x1,5 | 35 | 6 | 62 | 20 | 8 | 17 | 14 | 1,8 | 6 | 6 | 14 | | | 124.95 € | | | K1495.13308 | C | stainless steel | not hardened | 8 | M16x1,5 | 35 | 8 | 76 | 26 | 10 | 23 | 19 | 2,3 | 8 | 15 | 35 | | | 128.43 € | | | K1495.13410 | C | stainless steel | not hardened | 10 | M20x1,5 | 35 | 10 | 82 | 28 | 12 | 25 | 22 | 2,8 | 10 | 15 | 34 | | | 130.74 € | | | K1495.13412 | C | stainless steel | not hardened | 12 | M20x1,5 | 35 | 12 | 86 | 28 | 14 | 25 | 22 | 2,8 | 12 | 15 | 39 | | | 133.06 € | |
|
Indexing plungers, steel or stainless steel with status sensor, plastic mushroom grip locking slot and locknut |
More information |
| Order No. | Form | Main
material | Surface finish
body | D
| D1 | D2 | Travel
S | L | L1 | L2 | L3 | SW1 | SW2 | Fx30° | Travel
S | Spring force
initial pressure
F1 approx. N | Spring force
final pressure
F2 approx. N | CAD | Acc. | Price | Order |
|---|
| K1495.4105 | D | steel | hardened | 5 | M10x1 | 35 | 5 | 57 | 17 | 7 | 15 | 13 | 17 | 1,3 | 5 | 5 | 12 | | | 116.86 € | | | K1495.4206 | D | steel | hardened | 6 | M12x1,5 | 35 | 6 | 62 | 20 | 8 | 17 | 14 | 19 | 1,8 | 6 | 6 | 14 | | | 118.02 € | | | K1495.4308 | D | steel | hardened | 8 | M16x1,5 | 35 | 8 | 76 | 26 | 10 | 23 | 19 | 24 | 2,3 | 8 | 15 | 35 | | | 119.17 € | | | K1495.4410 | D | steel | hardened | 10 | M20x1,5 | 35 | 10 | 82 | 28 | 12 | 25 | 22 | 30 | 2,8 | 10 | 15 | 34 | | | 122.64 € | | | K1495.4412 | D | steel | hardened | 12 | M20x1,5 | 35 | 12 | 86 | 28 | 14 | 25 | 22 | 30 | 2,8 | 12 | 15 | 39 | | | 124.95 € | | | K1495.04105 | D | stainless steel | hardened | 5 | M10x1 | 35 | 5 | 57 | 17 | 7 | 15 | 13 | 17 | 1,3 | 5 | 5 | 12 | | | 123.80 € | | | K1495.04206 | D | stainless steel | hardened | 6 | M12x1,5 | 35 | 6 | 62 | 20 | 8 | 17 | 14 | 19 | 1,8 | 6 | 6 | 14 | | | 124.95 € | | | K1495.04308 | D | stainless steel | hardened | 8 | M16x1,5 | 35 | 8 | 76 | 26 | 10 | 23 | 19 | 24 | 2,3 | 8 | 15 | 35 | | | 128.43 € | | | K1495.04410 | D | stainless steel | hardened | 10 | M20x1,5 | 35 | 10 | 82 | 28 | 12 | 25 | 22 | 30 | 2,8 | 10 | 15 | 34 | | | 130.74 € | | | K1495.04412 | D | stainless steel | hardened | 12 | M20x1,5 | 35 | 12 | 86 | 28 | 14 | 25 | 22 | 30 | 2,8 | 12 | 15 | 39 | | | 133.06 € | | | K1495.14105 | D | stainless steel | not hardened | 5 | M10x1 | 35 | 5 | 57 | 17 | 7 | 15 | 13 | 17 | 1,3 | 5 | 5 | 12 | | | 123.80 € | | | K1495.14206 | D | stainless steel | not hardened | 6 | M12x1,5 | 35 | 6 | 62 | 20 | 8 | 17 | 14 | 19 | 1,8 | 6 | 6 | 14 | | | 124.95 € | | | K1495.14308 | D | stainless steel | not hardened | 8 | M16x1,5 | 35 | 8 | 76 | 26 | 10 | 23 | 19 | 24 | 2,3 | 8 | 15 | 35 | | | 128.43 € | | | K1495.14410 | D | stainless steel | not hardened | 10 | M20x1,5 | 35 | 10 | 82 | 28 | 12 | 25 | 22 | 30 | 2,8 | 10 | 15 | 34 | | | 130.74 € | | | K1495.14412 | D | stainless steel | not hardened | 12 | M20x1,5 | 35 | 12 | 86 | 28 | 14 | 25 | 22 | 30 | 2,8 | 12 | 15 | 39 | | | 133.06 € | |
|
Other items in this category |
|
| Availability Here you can check item's availability. |
|
