|
Polyamide (PA 6) Polyamide with 30% glass fibres (PA 6 GF 30) Polyamide with 30% glass beads (PA 6 GB 30)
Short designation |
PA 6 |
PA 6 GF 30 |
PA 6 GB 30 |
Description |
Polyamide (polymerizate) |
Polyamide with 30% glass fibres |
Polyamide with 30% glass beads |
Mechanical properties |
|
|
|
Test specimen condition |
Dry/damp |
Dry/damp |
Dry/damp |
Tensile strength [MPa] |
No info |
175/110 |
80/55 |
Elastic modulus (tensile) [MPa] |
3000/1000 |
9000/6000 |
5700/3400 |
Ball indentation hardness [MPa] |
150/70 |
220/150 |
180/105 |
Physical properties |
|
|
|
Density [g/cm³] |
1.14 |
1.36 |
1.36 |
Melting point [°C] |
220 |
220 |
220 |
Application temperatures |
|
|
|
Max. temp., short-term [°C] |
180 |
200 |
200 |
Max. temp., continuous [°C] |
90 |
130 |
90 |
Min. application temp. [°C] |
-40 |
-40 |
-40 |
Other properties |
|
|
|
Flammability according to UL 94 |
HB |
HB |
HB |
Water absorption (normal climate) [%] |
3 |
2.1 |
2.1 |
Chemical resistance |
|
|
|
Mineral grease and oils |
+ |
+ |
+ |
Petrol |
+ |
+ |
+ |
Weak/strong acids |
o/- |
o/- |
o/- |
Weak/strong alkalis |
+/o |
o/- |
+/o |
Perchloroethylene |
+ |
+ |
+ |
Trichloroethylene |
+ |
+ |
+ |
Acetone |
+ |
+ |
+ |
Alcohols |
+ |
+ |
+ |
Hydrolysis resistance (hot water) |
o |
o |
o |
Weather/UV radiation |
o |
o |
o |
|
+ resistant / o conditionally resistant / - not resistant |
This information is for reference only; we do not assume any liability for its accuracy. The properties of thermoplastics are highly dependent on their specific composition and their additives. |
Back to overview |
|
|
|
Availability Here you can check item's availability. |
|