|
Material No. |
1.2842 |
US standard (AISI) |
|
Abbreviation |
90MnCrV8 |
Old designation |
|
Description |
Tool steel |
Composition Alloy constituents [%] |
C: 0.85 – 0.95 Si: 0.10 – 0.40 Mn: 1.80 – 2.20 P: ≤ 0.030 S: ≤ 0.030 Cr: 0.20 – 0.50 V: 0.05 – 0.20 |
Density [g/cm³] |
7.9 |
Yield point Rp0.2 / Re[N/mm²] |
|
Tensile strength Rm [N/mm²] |
|
Elongation after fracture A [%] |
|
Machinability |
Good |
Weldability |
Suitable |
Heat treatment |
Possible |
Other properties |
|
Main uses |
Cross roller guide rails, T-slot scrapers, measuring tools, plastic and rubber moulds, forming dies |
|
This information is for reference only; we do not assume any liability for its accuracy. The properties of steel materials are highly dependent on their thermal and/or mechanical treatment. |
Back to overview |
|
|
|
Availability Here you can check item's availability. |
|