|
| Material No. |
1.1206 |
| US standard (AISI) |
|
| Abbreviation |
C50E |
| Old designation |
Ck 50 |
| Description |
Carbon steel |
Composition
Alloy constituents [%] |
C: 0.47 – 0.55
Si: ≤ 0.40
Mn: 0.60 – 0.90
P: ≤ 0.030
S: ≤ 0.035
Cr: ≤ 0.40
Mo: ≤ 0.10
Ni: ≤ 0.40 |
| Density [g/cm³] |
7.85 |
Yield point
Rp0.2 / Re[N/mm²] |
>= 460 |
Tensile strength
Rm [N/mm²] |
700 – 850 |
Elongation after fracture
A [%] |
>= 15 |
| Machinability |
Good |
| Weldability |
Unsuitable |
| Heat treatment |
Possible |
| Other properties |
|
| Main uses |
Clamp hubs |
|
| This information is for reference only; we do not assume any liability for its accuracy. The properties of steel materials are highly dependent on their thermal and/or mechanical treatment. |
Back to overview |
|
|
|
| Availability Here you can check item's availability. |
|
