|
Material No. |
1.1172 |
US standard (AISI) |
|
Abbreviation |
C35EC |
Old designation |
Cq 35 |
Description |
Carbon steel |
Composition Alloy constituents [%] |
C: 0.32 – 0.39 Si: ≤ 0.30 Mn: 0.50 – 0.80 P: ≤ 0.025 S: ≤ 0.025 Cu: ≤ 0.25 |
Density [g/cm³] |
7.85 |
Yield point Rp0.2 / Re[N/mm²] |
>= 370 |
Tensile strength Rm [N/mm²] |
600 – 750 |
Elongation after fracture A [%] |
>= 19 |
Machinability |
- |
Weldability |
Unsuitable |
Heat treatment |
Possible |
Other properties |
The properties are optimised for cold forming. |
Main uses |
Feet with grub screws |
|
This information is for reference only; we do not assume any liability for its accuracy. The properties of steel materials are highly dependent on their thermal and/or mechanical treatment. |
Back to overview |
|
|
|
Availability Here you can check item's availability. |
|