|
1.0718 free-cutting steel
Material No. |
1.0718 |
US standard (AISI) |
12L14, 12L13 |
Abbrebviation |
11SMnPb30 |
Old designation |
9SMnPb28 |
Description |
Free-cutting steel |
Composition Alloy constituents [%] |
C: ≤ 0.14 Si: ≤ 0.05 Mn: 0.90 – 1.30 P: ≤ 0.110 S: 0.270 – 0.330 Pb: 0.200 – 0.350 |
Density [g/cm³] |
7.9 |
Yield point Rp0.2 / Re[N/mm²] |
245 – 440 |
Tensile strength Rm [N/mm²] |
360 – 570 |
Elongation after fracture A [%] |
≥ 6 |
Machinability |
Very good |
Weldability |
Suitable to a limited extent |
Heat treatment |
Limited |
Other properties |
|
Main uses |
Indexing plungers, knurled screws, clevis joints, mass-produced parts for the automotive industry, device and equipment construction |
|
This information is for reference only; we do not assume any liability for its accuracy. The properties of steel materials are highly dependent on their thermal and/or mechanical treatment. |
Back to overview |
|
|
|
Availability Here you can check item's availability. |
|