- Operating parts | standard elements
- Clamping levers, tension levers, cam levers
- Grips, knobs
- Pull handles, tubular handles, recessed handles
- Handwheels, crank handles, position indicators
- Quarter-turn locks, edge protection profiles
- Hinges
- Swivel feet, levelling feet
- Tube connectors, profile connectors
- Telescopic slides
- Latches, snap locks, slam latches
- Toggle clamps, power clamps
- Clamping elements
- Spring plungers, indexing plungers, ball lock pins
- Support elements, locating elements, stop elements
- Machine and fixture components
- Joints
- Magnets
- Buffer elements
- Level indicators, screw plugs
- Scales, scale rings, level vials
- Material handling
- Tools, workshop supplies
- Hygiene Shield
- Clamping technology
- Special solutions
- Classic products
- Order number, changeover
|
|
K1854Support elements, hydraulic, screw-on single-acting with spring... |
go back |
|
Item description/product images |
|
|
DescriptionProduct description:Support elements are used during machining to prevent vibrations and deflections on the workpiece. The screw-on support elements can be mounted horizontally or vertically. The two mounting options enable space-saving positioning in the clamping fixtures. Hydraulic locking can be used in combination or separately with hydraulic clamping.Material:Housing and piston steel.Version:Housing black oxidised. Piston hardened.Note:Form A, engaged by hydraulics: Clamping bolt retracted in initial position. Pin hydraulically extended and engaged by spring force. Form B, engaged by spring force: Clamping pin extended in initial position. Engaged by spring force
Permitted loading forces must be taken into account.
Follow safety instructions.Type of operation:Drilled channels.Technical data:- Max. operating pressure: 500 bar. - Permitted loading at 500 bar: 9 kN. - Min. oil pressure: 100 bar. - Max. tightening torque: 60 Nm.Assembly:See mounting contour.Advantages:- Integrated metal wiper. - Always engaged by spring force. - Low mounting dimensions. - Horizontal/vertical mounting possible. - Separate/combined locking and clamping process - Installed Kantseal washerSupplied with1 Kantseal square washer supplied.Drawing reference:Special features: DownloadHere is all the information as a PDF datasheet:
Are you looking for CAD data? These can be found directly in the product table.
|
Drawings (total overview) |
Support elements, hydraulic, screw-on, Form A, docking via hydraulics |
More information |
Order No. | Form | Piston Ø | travel | Connection type | D | G | H | H1 | H2 | H3 | H4 | H5 | SW | SW1 | SW2 | Spring force min. (N) | Spring force F approx. (N) | Flow rate max. (cm³/s) | CAD | Acc. | Price | Order |
---|
K1854.160823061 | A | 16 | 8 | drilled channels | 28,2 | M30x1,5 | 72,5 | 55,5 | 9,5 | 10 | 6 | 10 | 24 | 13 | 17 | 10 | 23 | 25 | | | on request | |
|
Support elements, hydraulic, screw-on, Form B, docking via spring |
More information |
Order No. | Form | Piston Ø | travel | Connection type | D | G | H | H1 | H2 | H3 | H4 | H5 | SW | SW1 | SW2 | Spring force min. (N) | Spring force F approx. (N) | CAD | Acc. | Price | Order |
---|
K1854.160823062 | B | 16 | 8 | drilled channels | 28,2 | M30x1,5 | 80,5 | 55,5 | 9,5 | 10 | 6 | 10 | 24 | 13 | 17 | 8 | 13 | | | on request | |
|
Other items in this category |
|
Availability Here you can check item's availability. |
|