- Operating parts | standard elements
- Clamping technology
- Workholding Technology
- Modular Clamping Technology
- Basic elements
- K0800
Baseplates, grey cast iron
with grid holes
- K0800
Baseplates, grey cast iron
with T-slots
- K0806
Subplates, grey cast iron
with pre-machined clamping faces
- K0806
Subplates, grey cast iron
with grid holes
- K0806
Subplates, grey cast iron
with T-slots
- K0805
Workholding cubes, grey cast iron
with pre-machined clamping faces
- K0805
Workholding cubes, grey cast iron
with grid holes
- K0805
Workholding cubes, grey cast iron
with T-slots
- K0805
Tombstones cube
without grid holes
- K1533
Clamping towers, grey cast iron, 4-sided,
with pre-machined clamping faces
- K1533
Clamping towers, grey cast iron, 4-sided,
with grid holes
- K1534
Clamping towers, grey cast iron, 6-sided,
with pre-machined clamping faces
- K1534
Clamping towers, grey cast iron, 6-sided,
with grid holes
- K1535
Clamping towers, grey cast iron, 8-sided,
with pre-machined clamping faces
- K1535
Clamping towers, grey cast iron, 8-sided,
with grid holes
- K0803
Tombstones, grey cast iron, double-sided,
with pre-machined clamping faces
- K0803
Tombstones, grey cast iron, double-sided,
with grid holes
- K0803
Tombstones, grey cast iron, double-sided,
with T-slots
- K0803
Tombstones double-sided
without grid holes
- K0804
Tombstone, grey cast iron, double-sided,
for interchangeable subplates
- K0801
Interchangeable subplates, grey cast iron,
with pre-machined clamping faces
- K0801
Interchangeable subplates, grey cast iron
with grid holes
- K1532
Baseplates, grey cast iron, round,
with grid holes
- K1532
Baseplates, grey cast iron, round,
with T-slots
- K1531
Angle plates, grey cast iron, wide
with pre-machined clamping faces
- K1531
Angle plates, grey cast iron, wide
with grid holes
- K1531
Angle plates, grey cast iron, wide
with T-slots
- K1451
Angle plates
with or without T-slots cast iron
- Add-on elements
- Fastener elements, accessories
- Zero Point Clamping Technology
- Vice Clamping Technology
- Special solutions
- Classic products
- Order number, changeover
|
|
|
K1535Clamping towers, grey cast iron, 8-sided, with grid holes |
go back |
|
Item description/product images |
|
|
DescriptionMaterial:GJL 300.Version:Support and mounting surfaces precision machinedNote:Grid spacing 50 ±0.02 mm.
Clamping towers with grid holes are used on horizontal machining centres.
The alphanumerically labelled grid holes mean that the clamping elements can be assigned in a defined manner in the event of repeat setups.
The clamping towers conform to machine tables for machine tools acc. to DIN 55201 and JIS6337-1980.
Please order locating pins for positioning subplates on machine tables acc. to DIN 55201 separately.
Please order protection plugs to plug unused grid holes separately.
Ring bolts for hoisting are supplied.
Other dimensions available on request.On request:other dimensions.Drawing reference:1) grid hole
2) hole for DIN 912 cap screw (D3/D4) DownloadHere is all the information as a PDF datasheet:
Are you looking for CAD data? These can be found directly in the product table.
|
Other items in this category |
|
| Availability Here you can check item's availability. |
|
