|
| Short designation |
PA 12 |
| Description |
Polyamide
(polymerizate) |
| Mechanical properties |
|
| Test specimen condition |
Dry/damp |
| Tensile strength [MPa] |
No info |
| Elastic modulus (tensile) [MPa] |
1500/1100 |
| Ball indentation hardness [MPa] |
95/80 |
| Physical properties |
|
| Density [g/cm³] |
1.01 |
| Melting point [°C] |
180 |
| Application temperatures |
|
| Max. temp., short-term [°C] |
150 |
| Max. temp., continuous [°C] |
95 |
| Min. application temp. [°C] |
-70 |
| Other properties |
|
| Flammability according to UL 94 |
HB |
Water absorption
(normal climate) [%] |
0.8 |
| Chemical resistance |
|
| Mineral greases and oils |
+ |
| Petrol |
+ |
| Weak/strong acids |
+/- |
| Weak/strong alkalis |
+/+ |
| Perchloroethylene |
+ |
| Trichloroethylene |
o |
| Acetone |
+ |
| Alcohols |
+ |
Hydrolysis resistance
(hot water) |
o |
| Weather/UV radiation |
o |
|
| + resistant / o conditionally resistant / - not resistant |
| This information is for reference only; we do not assume any liability for its accuracy. The properties of thermoplastics are highly dependent on their specific composition and their additives. |
Back to overview |
|
|
|
| Availability Here you can check item's availability. |
|
