- Operating parts | standard elements
- Clamping levers, tension levers, cam levers
- Grips, knobs
- Pull handles, tubular handles, recessed handles
- Handwheels, crank handles, position indicators
- Quarter-turn locks, edge protection profiles
- Hinges
- Swivel feet, levelling feet
- Tube connectors, profile connectors
- Telescopic slides
- Latches, snap locks, slam latches
- Toggle clamps, power clamps
- Clamping elements
- Spring plungers, indexing plungers, ball lock pins
- Spring plungers
- Indexing plunger
- K2047
Indexing plungers steel or stainless steel
with plastic eyelet grip
- K1502
Indexing plungers, stainless steel with plastic mushroom grip and remote actuation
- K2042
Bowden cable distributor
for indexing plungers with remote actuation
- K2116
Bowden cables
for indexing plungers with remote actuation
- K2023
Wire cables
with end piece
- K2024
Traction sleeves
with inner tube
- K2025
End sleeves
- K2026
Setscrews
- K2027
Screw nipples
locked with grub screw
- K1584
Indexing plungers, steel or stainless steel with plastic cam lever
- K2109
Indexing plunger, steel or stainless steel
short version with plastic cam lever
- K1744
Indexing plungers steel or stainless steel with plastic mushroom grip and status sensor, hardwired
- K1495
Indexing plungers, steel or stainless steel with status sensor and plastic mushroom grip
- K1845
Magnetic base
for WLAN antenna
- K1846
Extension cable
for WLAN antenna
- K0338
Indexing plungers, steel or stainless steel with plastic mushroom grip
- K1096
Indexing plungers, steel or stainless steel with plastic mushroom grip and thread lock
- K1149
Indexing plungers, steel with plastic mushroom grip and locked mark
- K1213
Indexing plungers, steel or stainless steel with plastic mushroom grip and lock
- K0630
Indexing plungers, steel or stainless steel with plastic mushroom grip and extended indexing pin
- K2000
Indexing plunger mini steel or stainless steel
with plastic mushroom grip
- K2001
Indexing plunger mini, die-cast zinc
with plastic mushroom grip and mounting flange
- K0631
Indexing plungers, steel or stainless steel, short version with plastic mushroom grip
- K1097
Indexing plungers, steel or stainless steel, short version with plastic mushroom grip and thread lock
- K1698
Indexing plungers, stainless steel for Hygienic USIT® seal and shim washers, with stainless steel mushroom grip
- K0632
Indexing plungers, stainless steel with stainless steel mushroom grip
- K2194
Indexing plungers, stainless steel short version with stainless steel mushroom grip
- K0735
Indexing plungers, steel or stainless steel for thin-walled parts, with plastic mushroom grip
- K0339
Indexing plungers, steel or stainless steel with plastic mushroom grip and cap
- K0747
Indexing plungers ECO, steel or stainless steel, with plastic mushroom grip
- K0635
Indexing plungers, steel or stainless steel without collar, with stainless steel pull ring
- K0346
Indexing plungers, steel or stainless steel, smooth version without collar, with plastic mushroom grip
- K0347
Indexing plungers, steel or stainless steel, smooth version without collar, with plastic mushroom grip and cap
- K0636
Indexing plungers, steel or stainless steel, smooth version without collar, with stainless steel pull ring
- K1839
Positioning bushes, steel or stainless steel
with status sensor
- K1840
Positioning bushes, steel or stainless steel
for status sensor
- K1290
Positioning bushes
for indexing plungers
- K0665
Spacer rings stainless steel
- K2146
Fastening set steel or stainless steel
for thin-walled parts
- K0736
Bush, tapered, steel or stainless steel, for Premium indexing plunger
- K0736
Premium - Indexing plungers, steel or stainless steel with plastic mushroom grip and cylindrical indexing pin
- K0736
Bush, cylindrical, steel or stainless steel, for Premium indexing plunger
- K0736
Premium - Indexing plungers, steel or stainless steel with plastic mushroom grip and tapered indexing pin
- K1300
Indexing plungers, steel or stainless steel with plastic mushroom grip, rotation lock and lead-in chamfer
- K1124
Indexing plungers, steel or stainless steel with plastic T-grip
- K0359
Precision indexing plungers, steel with plastic spherical knob and tapered indexing pin
- K0360
Bush, tapered, steel, for precision indexing plunger
- K0361
Precision indexing plungers, steel with plastic spherical knob and cylindrical indexing pin
- K0362
Bush, cylindrical, steel, for precision indexing plunger
- K1833
Indexing plungers, steel with plastic twist knob and tapered indexing pin
- K1834
Indexing plungers, steel with plastic twist knob and tapered indexing pin
- K1835
Bushing steel, tapered
- K1098
Indexing plungers ECO, steel or stainless steel with plastic mushroom grip and thread lock
- K0748
Indexing plungers ECO, steel or stainless steel, short version with plastic mushroom grip
- K0340
Indexing plungers, steel with draw hook
- K0341
Indexing plungers, steel or stainless steel with threaded pin
- K0342
Indexing plungers, steel or stainless steel with stainless steel pull ring
- K0343
Indexing plungers, steel or stainless steel, without collar, with plastic mushroom grip
- K0633
Indexing plungers, steel or stainless steel, without collar, with plastic mushroom grip and extended indexing pin
- K0634
Indexing plungers, stainless steel, without collar, with stainless steel mushroom grip
- K0344
Indexing plungers, steel or stainless steel without collar, with plastic mushroom grip and cap
- K1116
Indexing plungers, steel or stainless steel, pneumatic
- K0344
Screw-in washer
- K0345
Indexing plungers, steel or stainless steel without collar, with threaded pin
- K1582
Indexing and clamping grips, steel with plastic star grip
- K1583
Indexing and clamping grips, steel with plastic star grip and optical lock indicator
- K0245
indexing plungers, steel with plastic five lobe grip
- Cam action indexing plunger
- Ball lock pins
- Locking pins
- Retaining cables, ball chains
- Support elements, locating elements, stop elements
- Machine and fixture components
- Joints
- Magnets
- Buffer elements
- Level indicators, screw plugs
- Scales, scale rings, level vials
- Material handling
- Tools, workshop supplies
- Hygiene Shield
- Clamping technology
- Special solutions
- Classic products
- Order number, changeover
|
|
|
K1744Indexing plungers steel or stainless steel with plastic mushroom... |
go back |
|
|
DescriptionProduct description:Indexing plungers are used where any change in locking position due to lateral forces should be prevented. A new indexed position can be only be moved to after the pin has been manually retracted.
Form C and D are recommended for applications where the indexing pin should remain disengaged for an extended period and be prevented from springing back.
With indexing plungers with status sensor, the actuation status can be detected and evaluated electronically.
Material:Steel version:
Grub screw and indexing pin steel.
Stainless steel version:
Indexing pin hardened:
Threaded sleeve 1.4305.
Indexing pin 1.4034.
Indexing pin not hardened:
Threaded sleeve 1.4305.
Indexing pin 1.4305.
Mushroom grip black grey thermoplastic. Version:Steel version:
Threaded sleeve black oxidised.
Indexing pin hardened, ground and black oxidised.
Stainless steel version:
Threaded sleeve bright.
Indexing pin hardened and ground, bright.
Indexing pin not hardened and ground, bright.
Mushroom grip black grey RAL7021.Note:The connection to e.g. a machine control is established hardwired via the connection cable of the integrated sensor.
The status sensor activates by engagement with a travel of S - 1 mm.
Indexing plungers with status sensor are not suitable for personnel safety functions.Technical data:Inductive sensor:
Output circuit: PNP NO
Operating voltage: 6 - 30 V DC
Operating current: <100 mA
Contact gap: 1 mm
Switch frequency: <4000 Hz
Short-circuit proof: yes
Reverse polarity protection: yes
Rating: IP 67
Connection type: 2 m PVC cable
Temperature range: -10 °C - +70 °C
Approvals: CE, c UL us, EACApplication:Indexing plungers with status sensor allow actuation-dependent process control. It is also possible to ensure that the indexing pin is in the desired actuation status.On request:Special versions.Safety:Indexing plungers with status sensor are not suitable for personnel safety functions.Drawing reference:Form A: non-lockout type, without locknut
Form B: non-lockout type, with locknut
Form C: lockout type, without locknut
Form D: lockout type, with locknut
P = cable length
BN = brown
BK = black
BU = blue DownloadHere is all the information as a PDF datasheet:
Are you looking for CAD data? These can be found directly in the product table.
|
Drawings (total overview) |
Indexing plungers steel or stainless steel with plastic mushroom grip and status sensor, hardwired |
More information |
| Order No. | Form | Main
material | locating pin | D
| D1 | D2 | D3 | L | L1 | L2 | L3 | Travel
S | SW1 | Fx30° | P | Spring force
initial pressure
F1 approx. N | Spring force
final pressure
F2 approx. N | CAD | Acc. | Price | Order |
|---|
| K1744.11051 | A | 0.01 | Clamping joint TurnStop TS-280-8-8 | 5 | M10x1 | 25 | 2,4 | 51 | 17 | 7 | 15 | 5 | 13 | 1,3 | 2000 | 5 | 12 |  | | 0.00 € | | | K1744.12061 | A | 0.01 | Clamping joint TurnStop TS-280-8-8 | 6 | M12x1,5 | 25 | 2,4 | 56 | 20 | 8 | 17 | 6 | 14 | 1,8 | 2000 | 6 | 14 | | | 0.00 € | | | K1744.13081 | A | 0.01 | Clamping joint TurnStop TS-280-8-8 | 8 | M16x1,5 | 33 | 2,4 | 74 | 26 | 10 | 23 | 8 | 19 | 2,3 | 2000 | 15 | 35 | | | 0.00 € | | | K1744.14101 | A | 0.01 | Clamping joint TurnStop TS-280-8-8 | 10 | M20x1,5 | 33 | 2,4 | 80 | 28 | 12 | 25 | 10 | 22 | 2,8 | 2000 | 15 | 34 | | | 0.00 € | | | K1744.14121 | A | 0.01 | Clamping joint TurnStop TS-280-8-8 | 12 | M20x1,5 | 33 | 2,4 | 84 | 28 | 14 | 25 | 12 | 22 | 2,8 | 2000 | 15 | 39 | | | 0.00 € | | | K1744.011051 | A | 2-piece | Clamping joint TurnStop TS-280-8-8 | 5 | M10x1 | 25 | 2,4 | 51 | 17 | 7 | 15 | 5 | 13 | 1,3 | 2000 | 5 | 12 | | | 0.00 € | | | K1744.012061 | A | 2-piece | Clamping joint TurnStop TS-280-8-8 | 6 | M12x1,5 | 25 | 2,4 | 56 | 20 | 8 | 17 | 6 | 14 | 1,8 | 2000 | 6 | 14 | | | 0.00 € | | | K1744.013081 | A | 2-piece | Clamping joint TurnStop TS-280-8-8 | 8 | M16x1,5 | 33 | 2,4 | 74 | 26 | 10 | 23 | 8 | 19 | 2,3 | 2000 | 15 | 35 | | | 0.00 € | | | K1744.014101 | A | 2-piece | Clamping joint TurnStop TS-280-8-8 | 10 | M20x1,5 | 33 | 2,4 | 80 | 28 | 12 | 25 | 10 | 22 | 2,8 | 2000 | 15 | 34 | | | 0.00 € | | | K1744.014121 | A | 2-piece | Clamping joint TurnStop TS-280-8-8 | 12 | M20x1,5 | 33 | 2,4 | 84 | 28 | 14 | 25 | 12 | 22 | 2,8 | 2000 | 15 | 39 | | | 0.00 € | | | K1744.111051 | A | 2-piece | high performance thermoplastic | 5 | M10x1 | 25 | 2,4 | 51 | 17 | 7 | 15 | 5 | 13 | 1,3 | 2000 | 5 | 12 | | | 0.00 € | | | K1744.112061 | A | 2-piece | high performance thermoplastic | 6 | M12x1,5 | 25 | 2,4 | 56 | 20 | 8 | 17 | 6 | 14 | 1,8 | 2000 | 6 | 14 | | | 0.00 € | | | K1744.113081 | A | 2-piece | high performance thermoplastic | 8 | M16x1,5 | 33 | 2,4 | 74 | 26 | 10 | 23 | 8 | 19 | 2,3 | 2000 | 15 | 35 | | | 0.00 € | | | K1744.114101 | A | 2-piece | high performance thermoplastic | 10 | M20x1,5 | 33 | 2,4 | 80 | 28 | 12 | 25 | 10 | 22 | 2,8 | 2000 | 15 | 34 | | | 0.00 € | | | K1744.114121 | A | 2-piece | high performance thermoplastic | 12 | M20x1,5 | 33 | 2,4 | 84 | 28 | 14 | 25 | 12 | 22 | 2,8 | 2000 | 15 | 39 | | | 0.00 € | |
|
Indexing plungers steel or stainless steel with plastic mushroom grip, locknut and status sensor, hardwired |
More information |
| Order No. | Form | Main
material | locating pin | D
| D1 | D2 | D3 | L | L1 | L2 | L3 | Travel
S | SW1 | SW2 | Fx30° | P | Spring force
initial pressure
F1 approx. N | Spring force
final pressure
F2 approx. N | CAD | Acc. | Price | Order |
|---|
| K1744.21051 | B | 0.01 | Clamping joint TurnStop TS-280-8-8 | 5 | M10x1 | 25 | 2,4 | 51 | 17 | 7 | 15 | 5 | 13 | 17 | 1,3 | 2000 | 5 | 12 | | | 0.00 € | | | K1744.22061 | B | 0.01 | Clamping joint TurnStop TS-280-8-8 | 6 | M12x1,5 | 25 | 2,4 | 56 | 20 | 8 | 17 | 6 | 14 | 19 | 1,8 | 2000 | 6 | 14 | | | 0.00 € | | | K1744.23081 | B | 0.01 | Clamping joint TurnStop TS-280-8-8 | 8 | M16x1,5 | 33 | 2,4 | 74 | 26 | 10 | 23 | 8 | 19 | 24 | 2,3 | 2000 | 15 | 35 | | | 0.00 € | | | K1744.24101 | B | 0.01 | Clamping joint TurnStop TS-280-8-8 | 10 | M20x1,5 | 33 | 2,4 | 80 | 28 | 12 | 25 | 10 | 22 | 30 | 2,8 | 2000 | 15 | 34 | | | 0.00 € | | | K1744.24121 | B | 0.01 | Clamping joint TurnStop TS-280-8-8 | 12 | M20x1,5 | 33 | 2,4 | 84 | 28 | 14 | 25 | 12 | 22 | 30 | 2,8 | 2000 | 15 | 39 | | | 0.00 € | | | K1744.021051 | B | 2-piece | Clamping joint TurnStop TS-280-8-8 | 5 | M10x1 | 25 | 2,4 | 51 | 17 | 7 | 15 | 5 | 13 | 17 | 1,3 | 2000 | 5 | 12 | | | 0.00 € | | | K1744.022061 | B | 2-piece | Clamping joint TurnStop TS-280-8-8 | 6 | M12x1,5 | 25 | 2,4 | 56 | 20 | 8 | 17 | 6 | 14 | 19 | 1,8 | 2000 | 6 | 14 | | | 0.00 € | | | K1744.023081 | B | 2-piece | Clamping joint TurnStop TS-280-8-8 | 8 | M16x1,5 | 33 | 2,4 | 74 | 26 | 10 | 23 | 8 | 19 | 24 | 2,3 | 2000 | 15 | 35 | | | 0.00 € | | | K1744.024101 | B | 2-piece | Clamping joint TurnStop TS-280-8-8 | 10 | M20x1,5 | 33 | 2,4 | 80 | 28 | 12 | 25 | 10 | 22 | 30 | 2,8 | 2000 | 15 | 34 | | | 0.00 € | | | K1744.024121 | B | 2-piece | Clamping joint TurnStop TS-280-8-8 | 12 | M20x1,5 | 33 | 2,4 | 84 | 28 | 14 | 25 | 12 | 22 | 30 | 2,8 | 2000 | 15 | 39 | | | 0.00 € | | | K1744.121051 | B | 2-piece | high performance thermoplastic | 5 | M10x1 | 25 | 2,4 | 51 | 17 | 7 | 15 | 5 | 13 | 17 | 1,3 | 2000 | 5 | 12 | | | 0.00 € | | | K1744.122061 | B | 2-piece | high performance thermoplastic | 6 | M12x1,5 | 25 | 2,4 | 56 | 20 | 8 | 17 | 6 | 14 | 19 | 1,8 | 2000 | 6 | 14 | | | 0.00 € | | | K1744.123081 | B | 2-piece | high performance thermoplastic | 8 | M16x1,5 | 33 | 2,4 | 74 | 26 | 10 | 23 | 8 | 19 | 24 | 2,3 | 2000 | 15 | 35 | | | 0.00 € | | | K1744.124101 | B | 2-piece | high performance thermoplastic | 10 | M20x1,5 | 33 | 2,4 | 80 | 28 | 12 | 25 | 10 | 22 | 30 | 2,8 | 2000 | 15 | 34 | | | 0.00 € | | | K1744.124121 | B | 2-piece | high performance thermoplastic | 12 | M20x1,5 | 33 | 2,4 | 84 | 28 | 14 | 25 | 12 | 22 | 30 | 2,8 | 2000 | 15 | 39 | | | 0.00 € | |
|
Indexing plungers steel or stainless steel with plastic mushroom grip, locking slot and status sensor, hardwired |
More information |
| Order No. | Form | Main
material | locating pin | D
| D1 | D2 | D3 | L | L1 | L2 | L3 | Travel
S | SW1 | Fx30° | P | Spring force
initial pressure
F1 approx. N | Spring force
final pressure
F2 approx. N | CAD | Acc. | Price | Order |
|---|
| K1744.31051 | C | 0.01 | Clamping joint TurnStop TS-280-8-8 | 5 | M10x1 | 25 | 2,4 | 51 | 17 | 7 | 15 | 5 | 13 | 1,3 | 2000 | 5 | 12 | | | 0.00 € | | | K1744.32061 | C | 0.01 | Clamping joint TurnStop TS-280-8-8 | 6 | M12x1,5 | 25 | 2,4 | 56 | 20 | 8 | 17 | 6 | 14 | 1,8 | 2000 | 6 | 14 | | | 0.00 € | | | K1744.33081 | C | 0.01 | Clamping joint TurnStop TS-280-8-8 | 8 | M16x1,5 | 33 | 2,4 | 74 | 26 | 10 | 23 | 8 | 19 | 2,3 | 2000 | 15 | 35 | | | 0.00 € | | | K1744.34101 | C | 0.01 | Clamping joint TurnStop TS-280-8-8 | 10 | M20x1,5 | 33 | 2,4 | 80 | 28 | 12 | 25 | 10 | 22 | 2,8 | 2000 | 15 | 34 | | | 0.00 € | | | K1744.34121 | C | 0.01 | Clamping joint TurnStop TS-280-8-8 | 12 | M20x1,5 | 33 | 2,4 | 84 | 28 | 14 | 25 | 12 | 22 | 2,8 | 2000 | 15 | 39 | | | 0.00 € | | | K1744.031051 | C | 2-piece | Clamping joint TurnStop TS-280-8-8 | 5 | M10x1 | 25 | 2,4 | 51 | 17 | 7 | 15 | 5 | 13 | 1,3 | 2000 | 5 | 12 | | | 0.00 € | | | K1744.032061 | C | 2-piece | Clamping joint TurnStop TS-280-8-8 | 6 | M12x1,5 | 25 | 2,4 | 56 | 20 | 8 | 17 | 6 | 14 | 1,8 | 2000 | 6 | 14 | | | 0.00 € | | | K1744.033081 | C | 2-piece | Clamping joint TurnStop TS-280-8-8 | 8 | M16x1,5 | 33 | 2,4 | 74 | 26 | 10 | 23 | 8 | 19 | 2,3 | 2000 | 15 | 35 | | | 0.00 € | | | K1744.034101 | C | 2-piece | Clamping joint TurnStop TS-280-8-8 | 10 | M20x1,5 | 33 | 2,4 | 80 | 28 | 12 | 25 | 10 | 22 | 2,8 | 2000 | 15 | 34 | | | 0.00 € | | | K1744.034121 | C | 2-piece | Clamping joint TurnStop TS-280-8-8 | 12 | M20x1,5 | 33 | 2,4 | 84 | 28 | 14 | 25 | 12 | 22 | 2,8 | 2000 | 15 | 39 | | | 0.00 € | | | K1744.132061 | C | 2-piece | high performance thermoplastic | 6 | M12x1,5 | 25 | 2,4 | 56 | 20 | 8 | 17 | 6 | 14 | 1,8 | 2000 | 6 | 14 | | | 0.00 € | | | K1744.131051 | C | 2-piece | high performance thermoplastic | 5 | M10x1 | 25 | 2,4 | 51 | 17 | 7 | 15 | 5 | 13 | 1,3 | 2000 | 5 | 12 | | | 0.00 € | | | K1744.133081 | C | 2-piece | high performance thermoplastic | 8 | M16x1,5 | 33 | 2,4 | 74 | 26 | 10 | 23 | 8 | 19 | 2,3 | 2000 | 15 | 35 | | | 0.00 € | | | K1744.134101 | C | 2-piece | high performance thermoplastic | 10 | M20x1,5 | 33 | 2,4 | 80 | 28 | 12 | 25 | 10 | 22 | 2,8 | 2000 | 15 | 34 | | | 0.00 € | | | K1744.134121 | C | 2-piece | high performance thermoplastic | 12 | M20x1,5 | 33 | 2,4 | 84 | 28 | 14 | 25 | 12 | 22 | 2,8 | 2000 | 15 | 39 | | | 0.00 € | |
|
Indexing plungers steel or stainless steel with plastic mushroom grip, locknut, locking slot and status sensor, hardwired |
More information |
| Order No. | Form | Main
material | locating pin | D
| D1 | D2 | D3 | L | L1 | L2 | L3 | Travel
S | SW1 | SW2 | Fx30° | P | Spring force
initial pressure
F1 approx. N | Spring force
final pressure
F2 approx. N | CAD | Acc. | Price | Order |
|---|
| K1744.41051 | D | 0.01 | Clamping joint TurnStop TS-280-8-8 | 5 | M10x1 | 25 | 2,4 | 51 | 17 | 7 | 15 | 5 | 13 | 17 | 1,3 | 2000 | 5 | 12 | | | 0.00 € | | | K1744.42061 | D | 0.01 | Clamping joint TurnStop TS-280-8-8 | 6 | M12x1,5 | 25 | 2,4 | 56 | 20 | 8 | 17 | 6 | 14 | 19 | 1,8 | 2000 | 6 | 14 | | | 0.00 € | | | K1744.43081 | D | 0.01 | Clamping joint TurnStop TS-280-8-8 | 8 | M16x1,5 | 33 | 2,4 | 74 | 26 | 10 | 23 | 8 | 19 | 24 | 2,3 | 2000 | 15 | 35 | | | 0.00 € | | | K1744.44101 | D | 0.01 | Clamping joint TurnStop TS-280-8-8 | 10 | M20x1,5 | 33 | 2,4 | 80 | 28 | 12 | 25 | 10 | 22 | 30 | 2,8 | 2000 | 15 | 34 | | | 0.00 € | | | K1744.44121 | D | 0.01 | Clamping joint TurnStop TS-280-8-8 | 12 | M20x1,5 | 33 | 2,4 | 84 | 28 | 14 | 25 | 12 | 22 | 30 | 2,8 | 2000 | 15 | 39 | | | 0.00 € | | | K1744.041051 | D | 2-piece | Clamping joint TurnStop TS-280-8-8 | 5 | M10x1 | 25 | 2,4 | 51 | 17 | 7 | 15 | 5 | 13 | 17 | 1,3 | 2000 | 5 | 12 | | | 0.00 € | | | K1744.042061 | D | 2-piece | Clamping joint TurnStop TS-280-8-8 | 6 | M12x1,5 | 25 | 2,4 | 56 | 20 | 8 | 17 | 6 | 14 | 19 | 1,8 | 2000 | 6 | 14 | | | 0.00 € | | | K1744.043081 | D | 2-piece | Clamping joint TurnStop TS-280-8-8 | 8 | M16x1,5 | 33 | 2,4 | 74 | 26 | 10 | 23 | 8 | 19 | 24 | 2,3 | 2000 | 15 | 35 | | | 0.00 € | | | K1744.044101 | D | 2-piece | Clamping joint TurnStop TS-280-8-8 | 10 | M20x1,5 | 33 | 2,4 | 80 | 28 | 12 | 25 | 10 | 22 | 30 | 2,8 | 2000 | 15 | 34 | | | 0.00 € | | | K1744.044121 | D | 2-piece | Clamping joint TurnStop TS-280-8-8 | 12 | M20x1,5 | 33 | 2,4 | 84 | 28 | 14 | 25 | 12 | 22 | 30 | 2,8 | 2000 | 15 | 39 | | | 0.00 € | | | K1744.142061 | D | 2-piece | high precision | 6 | M12x1,5 | 25 | 2,4 | 56 | 20 | 8 | 17 | 6 | 14 | 19 | 1,8 | 2000 | 6 | 14 | | | 0.00 € | | | K1744.141051 | D | 2-piece | high performance thermoplastic | 5 | M10x1 | 25 | 2,4 | 51 | 17 | 7 | 15 | 5 | 13 | 17 | 1,3 | 2000 | 5 | 12 | | | 0.00 € | | | K1744.143081 | D | 2-piece | high precision | 8 | M16x1,5 | 33 | 2,4 | 74 | 26 | 10 | 23 | 8 | 19 | 24 | 2,3 | 2000 | 15 | 35 | | | 0.00 € | | | K1744.144101 | D | 2-piece | high precision | 10 | M20x1,5 | 33 | 2,4 | 80 | 28 | 12 | 25 | 10 | 22 | 30 | 2,8 | 2000 | 15 | 34 | | | 0.00 € | | | K1744.144121 | D | 2-piece | high precision | 12 | M20x1,5 | 33 | 2,4 | 84 | 28 | 14 | 25 | 12 | 22 | 30 | 2,8 | 2000 | 15 | 39 | | | 0.00 € | |
|
Other items in this category |
|
| Availability Here you can check item's availability. |
|
