Centring bushes

go back

Products
- Clamping technology
  - Zero Point Clamping Technology
    - Locating and clamping systems
      - Centring bushes

Item description/product images

DescriptionMaterial:Ball bearing steelVersion:Hardened, black oxidised.Note:By a centre distance tolerance of ±0.005 mm and two grade I centring bushes a repeat accuracy of ±0.013 mm is possible.
By a centre distance tolerance of ±0.03 mm and one grade I and one grade II centring bush a repeat accuracy of 0.04 mm is possible.
The centring bushes are pressed into the receiver holes of the tooling plates using a light pressure.
For further details see “General information”.Special features:

DownloadHere is all the information as a PDF datasheet:

Are you looking for CAD data? These can be found directly in the product table.

Datasheet K0936 Centring bushes

246 kB

Technical information locating and clamping system

399 kB

Drawings

Item selection/filter

Order No. grade i	T=tolerance grade i	Order No. grade ii	T=tolerance grade ii	D	D1	L	Bore size for centring bush Ø +0.01
K0936.113013	+0,005 - +0,018	K0936.213013	+0,025 - +0,050	13	19,04	13	19,016
K0936.113020	+0,005 - +0,018	K0936.213020	+0,025 - +0,050	13	19,04	20	19,016
K0936.116020	+0,005 - +0,018	K0936.216020	+0,025 - +0,050	16	25,042	20	25,016
K0936.116025	+0,005 - +0,018	K0936.216025	+0,025 - +0,050	16	25,042	25	25,016
K0936.120020	+0,005 - +0,018	K0936.220020	+0,025 - +0,050	20	35,042	20	35,018
K0936.120025	+0,005 - +0,018	K0936.220025	+0,025 - +0,050	20	35,042	25	35,018
K0936.125020	+0,005 - +0,018	K0936.225020	+0,025 - +0,050	25	35,042	20	35,018
K0936.125025	+0,005 - +0,018	K0936.225025	+0,025 - +0,050	25	35,042	25	35,018
K0936.130020	+0,005 - +0,018	K0936.230020	+0,025 - +0,050	30	45,042	20	45,018
K0936.130025	+0,005 - +0,018	-	-	30	45,042	25	45,018
K0936.135020	+0,005 - +0,018	-	-	35	45,042	20	45,018
K0936.135025	+0,005 - +0,018	K0936.235025	+0,025 - +0,050	35	45,042	25	45,018
K0936.135040	+0,005 - +0,018	K0936.235040	+0,025 - +0,050	35	45,042	40	45,018
K0936.135050	+0,005 - +0,018	K0936.235050	+0,025 - +0,050	35	45,042	50	45,018
K0936.150020	+0,005 - +0,018	K0936.250020	+0,025 - +0,050	50	63,546	20	63,521
K0936.150040	+0,005 - +0,018	K0936.250040	+0,025 - +0,050	50	63,546	40	63,521
K0936.150050	+0,005 - +0,018	K0936.250050	+0,025 - +0,050	50	63,546	50	63,521
-	-	K0936.250025	+0,025 - +0,050	50	63,546	25	63,521