- Operating parts | standard elements
- Clamping levers, tension levers, cam levers
- Grips, knobs
- Pull handles, tubular handles, recessed handles
- Handwheels, crank handles, position indicators
- Quarter-turn locks, edge protection profiles
- Hinges
- Swivel feet, levelling feet
- Tube connectors, profile connectors
- Telescopic slides
- Latches, snap locks, slam latches
- Toggle clamps, power clamps
- Clamping elements
- Spring plungers, indexing plungers, ball lock pins
- Support elements, locating elements, stop elements
- Self-aligning pads, thrust screws
- Grippers
- Locating pins, rest pads
- K0350
Locating pins
with ball-end Form A
- K0351
Locating pins
with ball-end Form B
- K0350
Locating pins
with flattened ball-end Form C
- K0351
Locating pins
with flattened ball-end Form D
- K0352
Positioning pins
cylindrical, ground
- K0353
Positioning pins cylindrical
not ground
- K0354
Positioning pins
free-milled, ground
- K0355
Positioning pins free-milled
not ground
- K0356
Locating pins expanding
- K0292
Rest pad hardened and ground steel, without centring.
- K1832
Rest pads
with contact sensor
- K0293
Locating pins and rest pads
DIN 6321
- K1094
Locating pins
with internal thread
- K1095
Locating bushes
for locating pins
- K0298
Positioning feet
- K0299
Positioning feet
- K0300
Fixture feet
with external thread
- K0301
Fixture feet
with internal thread
- K1302
Extension pieces
- K0294
Rest pad tempered and black oxidised steel
- K0295
Rest pads
with positioning pin
- K0296
Feet
with threaded pin, DIN 6320 (edition 1971)
- K1105
Rest pads
pin form, external thread
- K1105
Rest pads
pin form, internal thread
- K0303
Locating feet
- K0297
Support bolts
- K0305
Rest pad black oxidised, hardened and ground steel
- K0306
Rest pads adjustable
with locknut
- K0307
Rest pad steel or brass, rounded head
- K1200
Stop screw steel grade 10.9.
- K0308
Jack screws
- K1854
Support elements, hydraulic, screw-on
single-acting with spring return
- K0581
Stops adjustable, stainless steel
with status sensor
- K1633
Door stops plastic
for aluminium profile with buffer or with magnetic catch
- K1214
Clamp stops adjustable
for slot profiles
- Height-adjustable elements
- Machine and fixture components
- Joints
- Magnets
- Buffer elements
- Level indicators, screw plugs
- Scales, scale rings, level vials
- Material handling
- Tools, workshop supplies
- Hygiene Shield
- Clamping technology
- Special solutions
- Classic products
- Order number, changeover
|
|
|
K0294Rest pad tempered and black oxidised steel |
go back |
|
|
DescriptionMaterial:Body high carbon steel.Version:Body tempered and black oxidised.Note:Rest pads are for supporting machined and non-machined parts. They can also be used as stops and thrust pads in fixtures and toolmaking.
Studs or grub screws can be screwed and glued into the tapped hole D to make a rest pad with external thread.Drawing reference:Form A: flat face
Form B: ball end
Form C: diamond grip DownloadHere is all the information as a PDF datasheet:
Are you looking for CAD data? These can be found directly in the product table.
|
Drawings (total overview) |
Other items in this category |
|
| Availability Here you can check item's availability. |
|
